Bandsaw blade width

[hkcarbine]

I have this 2HP bandsaw, Acra KV50 on the way. One of my first jobs is to cut 3/8" mild steel into 5" circle. I'm thinking a 1/4" blade would be appropiate. Please advise the proper width.

HKcarbine
AKA Roger Q.

 

[IndianaJames]

Roger,

1/2" is too wide, but a 3/8" should cut down to a 2 1/2" circle. 1/4" is a bit small...cuts down to a 5/8" radius.

Jim

 

[hkcarbine]

Thank You!