As to screwing a BAT barrel in a Panda DON'T EVEN TRY IT!!!!!!!

[JerrySharrett]

The thread on trying to fit a BAT barrel on a Stolle Panda is going off on a tangent and someone is going to get hurt!!!!!

"If I could do this........"

"If I could do that......."

"I'm just thinking on paper......"

Guys and gals unless you really, REALLY, know what you are doing and REALLY know what you have LEAVE IT ALONE!!!!!


Wilbur, please make this a "sticky" for a few days please.

 

[Mike Bryant]

The thread on trying to fit a BAT barrel on a Stolle Panda is going off on a tangent and someone is going to get hurt!!!!!

"If I could do this........"

"If I could do that......."

"I'm just thinking on paper......"

Guys and gals unless you really, REALLY, know what you are doing and REALLY know what you have LEAVE IT ALONE!!!!!


Wilbur, please make this a "sticky" for a few days please.

Jerry a friend of mine down at Midland I think before one of the Buffalo Shoots mistakenly screwed a barrel for a Panda onto a CPS. There shouldn't have been anyway that the rifle would have fired as the headspace was about a 1/4" too long and the gap space between the end of the barrel and the bolt nose about the same. However, it did fire. It was a good thing he was wearing shooting glasses as his face was peppered with bits of brass and debris. The shooting glasses saved his eyesight.