F
fatelvis111
Guest
Just wondering if any of you guys are using David Tubb's lighter firing pins and/or his FP springs? Thanks!
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
W
Willbas
Guest
I am using his dual springs in my Rem 700 Action it cut the bolt jump down to almost nothing.
F
fatelvis111
Guest
I am using his dual springs in my Rem 700 Action it cut the bolt jump down to almost nothing.
Are you using your factory firing pin, or his lighter aftermarket one?
J
jaychris
Guest
I tried his duo-spring in a Panda F-Class action. Effect on accuracy was not good. I also would not use a speedlock reduced-weight FP. It's great for when you need a quick lock-time (when you are slinging it up maybe), but it has a detrimental effect on accuracy, when you are trying to hold a half-MOA X-ring or better.
W
Willbas
Guest
Are you using your factory firing pin, or his lighter aftermarket one?
I have a PTG bolt in my Rem 700 with their steel small firing pin non fluted.