anschutz trigger for 52C

G

gvg

Guest
Hi
I ear :confused: about it is posible to install a anschutz trigger to a 52C with some special housing ...It is posible ? some one know who made this housing´s

regards
greg
gvg71@yahoo.com
 
5018 & 52's

Thinking you would need a hanger...Chanpions Shooters Supply..New Albany Ohio
 
Never seen one

I've been shooting 52's, for almost fifty years. I've never seen anything like you discribe. You can modify a C, D or E trigger, or find a used Canjar LP, and achieve the same purpose without having to machine the action to accept an Anshutz trigger.
 
Since a 52-C trigger sear contacts the firing pin about mid bolt and an Anschutz trigger sear contacts the cocking piece in the rear of the bolt(unless I'm badly mistaken), I'd say it'd be tough to make it work. However with enough machining and using a firing pin from a 52-B which has the rear sear/firing pin location you might possibly get it to work. I've seen Jewell triggers fitted to 52-B's and they worked well. Wasn't a bolt on item though, the action has to have a slot milled for the Jewell trigger and a hanger added, and the cocking piece angled to fit the Jewell trigger sear.
 
Hi,
The only thing that I have seen was a BRILEY adapter.
This adapts an Anshutz to a Remington style of action.
Tom R
 
You must log in or register to reply here.
Back
Top