M
matchman
Guest
Im curious about my Well used Nesika J action. Should I be able to operate the bolt (no amo) without holding or manipulating the rifle to keep it steady.
(I noticed without the firing assembly its effortless,also with amo if the shoulder is correct)
The aluminum end cap that rotates on the bolt(firing pin asmb) has some gauling that I polished most of the grooves out, seams to have helped some.
The Bolt lugs kinda look like a old record surface but no metal transfer or big grooves (Is this also considered galled?)
Action feals relatively smooth just kinda heavy to operate. --Yes its well lubed--
Is what I see and feal normal or do I need to seek help.
Thanks
Adam
(I noticed without the firing assembly its effortless,also with amo if the shoulder is correct)
The aluminum end cap that rotates on the bolt(firing pin asmb) has some gauling that I polished most of the grooves out, seams to have helped some.
The Bolt lugs kinda look like a old record surface but no metal transfer or big grooves (Is this also considered galled?)
Action feals relatively smooth just kinda heavy to operate. --Yes its well lubed--
Is what I see and feal normal or do I need to seek help.
Thanks
Adam