K
KEVELDER21
Guest
Need help. I am an avid reloader and just started reloading for a 7mm Remington Mag. I used a oal gauge to get mesaured length from bottom of case to ogive bullet. It's about .055 longer than a factory Remington Load. I measured this 5 different time and came up with 2.784 oal to the ogive of the bullet. The factory Remington load is 2.729 to the ogive. Does anyone have any info on whether .055 jump is o.k. Just seems like that's an awful far jump to the lands. Any thoughts on this would be appreciative.
