B
B SLAGLE
Guest
I am looking for a good set of wilson 6 ppc dies can anyone help?
Dick Grosbier
Club Coordinator
I believe for sizing Wilson only makes neck sizing dies. This is not what you want. Get either a Harrels which is sized to your actual chamber by sending them some fired cases or get a Redding Bushing Full length sizer.
Dick
R
RLHBUSL
Guest
I have a new Wilson neck sizing die that I would sell. Email me if you're interested: ryanarrison@sbcglobal.net
M
Mike Swartz
Guest
You need to find out something about your chamber;dimensionally. Sizing dies are seldom successful when chosen on a one size fits all basis.
Mike Swartz
Mike Swartz
JerrySharrett
Senile Member
There are several good custom 6PPC die makers. The most economical one is probably Lynwood and Walter Harrell. They make the die in 3 different sizes and if you will send them a couple of fired cases they will make one to exactly give you the correct amount of resizing for that chamber.
http://www.harrellsprec.com/
http://www.neiljones.com/
http://www.sinclairintl.com/
http://www.harrellsprec.com/
http://www.neiljones.com/
http://www.sinclairintl.com/
Joe Maisto
New member
Right on !
B
B SLAGLE
Guest
The man who had this rifle built past away some time back . It is a Stolle Panda 6mmBR smith by Mike Bryant hear is where the 6ppc comes into play. The rifle came with two barrels a 6br and 6ppc the ppc was never used still new. What should I do ? How could I find out the free bore?
Butch Lambert
Active member
I'd contact Mike Bryant.
Butch
Butch
B
B SLAGLE
Guest
I just wounder how for back he keeps recorders. I just hope the 6ppc will shoot like the 6Br last weekend it shoot a .0215 three shoot group at 100 yards. I just want the 6ppc to play with no group shooting for now. I am going to have me a 30BR barrel made for this rifle to shoot score with think that would be fun.
Every time I scroll past this thread "6PPC dies" I can't help but remember my old friend Samual Langhorne Clemens proclaiming that "reports of my death have been greatly exaggerated."
I feel that the PPC is still viable, and to believe it has died I'll have to view the body.
So THERE you'se thurty-tooters
al
I feel that the PPC is still viable, and to believe it has died I'll have to view the body.
So THERE you'se thurty-tooters
al
Dick Grosbier
Club Coordinator
Every time I scroll past this thread "6PPC dies" I can't help but remember my old friend Samual Langhorne Clemens proclaiming that "reports of my death have been greatly exaggerated."
I feel that the PPC is still viable, and to believe it has died I'll have to view the body.
So THERE you'se thurty-tooters
al
Who said anything about the 6 PPC being dead ? The only death I see mentioned in this thread is the poor fellow who originally owned the rifles.
Dick