.300 Winchester magnum die set

T

trazman

Guest
Hello guys, I have a Blaser R93 lrs2 rifle and I want to buy a die set for it, What do you suggest?
I will reload for tactical shooting up to 1000m, smk 190gn and 210gn bullets...
 
A compromise between expensive custom dies and Lee dies would be Redding Competition Dies. I have used the typical .300 Mag reloading dies then switched to Redding Competition dies, they are much better. No button to pull the neck out of alignment and only the necessary sizing of the neck (.002), possibly more with heavy bullets and using the magazine to prevent recoil moving them. If you only shoot single shot .002 is enough.
 
and add a inovative technologies(?) base sizing die..the brass will last a long time...it sizes down around th eblet where regular dies miss....

mike in co
 
mike in co said:
and add a inovative technologies(?) base sizing die..the brass will last a long time...it sizes down around th eblet where regular dies miss....

mike in co
Click to expand...

Can you tell me who makes this dies?
 
i use a forestor benchrest 7/8-14 press type of die..i use a wilson neck sizer//arbor press type....
theis is for a 1000yd br rifle..not a hunting gun

mike in co
 
Is it worth the extra money the forster ultra micro meter seating die or there is no real need for a micrometer?
 
just easier to adjust seating depth/oal...may not be an issue if you are just loading to mag length...
i single load, so i load in and out of the lands...no mag.

mike in co
 
My mag is just long enough that bullets touch the rifling... So I will try to find the right seating depth from that point and back...
 
You must log in or register to reply here.
Back
Top