260 Rem match reamer ??????

D

dbergen

Guest
I would like to order a 260 Rem match reamer.:confused:

Can somebody give me some suggestions on throat length and neck dia and other important sizes.

I want to accomplish following goals.

cartridge overall length 2.800 with 123 Scenar bullet.

Base brass is Lapua both 243 and 308
With the 243 brass I want a minimum no turn neck. When I neck down the 308 brass it is going to be thicker and then I want to be able to neck turn the brass for perfect fit. So I have a match chamber an can neck turn if I want to.

If anybody has done this please give me some advise, all info is welcome
Good shooting
David
 
I would phone and talk to Dave Kiff at Pacific Tool & Die... I bet he has the specs you want... and he grinds a nice reamer...
 
When I neck up 243 Lapua I have to neck turn. The shoulder becomes part of the neck and it is considerably thicker. I have neck down 308 and in theory it should be thicker but when measuring it, it is not always so. Talk to your gunsmith or call Dave about a reamer. He is very knowledgable.
 
You must log in or register to reply here.
Back
Top