260 Rem Freebore

[JEC]

I recieved reamer prints from PT&G for 260 Rem as I am looking at building one that will seat 120SMK's with an OAL of approx 2.84" touching the lands. I asked for one with standard SAAMI specs and the lead measurment is .1185 ----and one with the bullet seated as described above, for which they sent two: One has lead of .040 spec and the other of .090. Both these seem short---unless the SAAMI spec is wrong ....comments?

 

[ultramagmed]

I just received a reamer the other day that I ordered from Dave Kiff for a 6.5x47 Lapua throated for 120's, and it has .098 F.B.


Hope this helps,
Med.