J
Just Mike
Guest
Anyone know where I can buy one for a Savage 12 F-T/R?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
C
chuck furniss
Guest
Brownells or Midway.
Chuck.
Chuck.
Ferrell scope base
I have one on my Savage LRPV. One thing to keep in mind is that the Ferrell bases are MUCH higher than other manufacturers and you will need lower rings to keep the scope close to the barrel. I use a Seaver T-24 and use low Weaver rings to get the scope down.
A friend has a Savage F T/R and the stock design is such that he had to have an adjustable cheek piece installed as NO rings could get the scope low enough with the Ferrell base.
I have one on my Savage LRPV. One thing to keep in mind is that the Ferrell bases are MUCH higher than other manufacturers and you will need lower rings to keep the scope close to the barrel. I use a Seaver T-24 and use low Weaver rings to get the scope down.
A friend has a Savage F T/R and the stock design is such that he had to have an adjustable cheek piece installed as NO rings could get the scope low enough with the Ferrell base.
I
Im_leary
Guest
Try Seekins. You can order from the web site at: http://www.seekinsprecision.com/rails.html
I have seen one of his ring/mount sets on a 12F. The height was perfect.
I have his mounts and rings on my Remington 40-X F-Class gun and Winchester Mod. 70 ground hog gun. His selection of ring and mount heights made it easy to get the scopes just right... even my Nightforce 8-32 NXS is perfect (for me), with the objective bell .100" above the barrel.
I have seen one of his ring/mount sets on a 12F. The height was perfect.
I have his mounts and rings on my Remington 40-X F-Class gun and Winchester Mod. 70 ground hog gun. His selection of ring and mount heights made it easy to get the scopes just right... even my Nightforce 8-32 NXS is perfect (for me), with the objective bell .100" above the barrel.
P
Peter
Guest
Evolution Gun Works
W
wgerman
Guest
mid south shooters supply
T
tsiero
Guest
EGW AKA Evolution Gun Works
I order one in 25MOA from EGW. They will set it up for a left port rifle for an extra $10.00 and re anodize it. Total cost was $50.00. plus shipping. They also make extended bases which will give you an extra 3" of mounting length.
http://www.egw-guns.com/
I order one in 25MOA from EGW. They will set it up for a left port rifle for an extra $10.00 and re anodize it. Total cost was $50.00. plus shipping. They also make extended bases which will give you an extra 3" of mounting length.
http://www.egw-guns.com/
R