11 m/m base

G

garrisone

Guest
Where can I find 11 m/m base to mount 11 m/m rings on a rifle. thanks for any help. garrisone.
 
If by 11mm you mean an Anschutz or Suhl dovetail; Kelbly rings work well as do Hall rings or those from Ken Fulghum. bob
 
Bob : Thanks for the reply. What I need is the base to mount Ken Folgum's offset rings to the rifle. Looking for someone that makes the base to screw on the action . The base should be the same as the 11 m/m dovetail on Anschutz or Suhl. Any help would be appreciated. Thanks again garrisone.
 
Garrisone: Sounds like you need Davidson bases. Sinclair International is a good source. If they don't have ready made for your rifle its a simple matter for your smith to make a set from Davidson base stock. There is a very slight difference in size between the 11mm rail and Davidson, but if the rings don't go on a few swipes with a file on the ring base takes care of things. I am a bit confused tho......if you already have the dovetails on the receiver why do you need bases? Just slip the Fulghum rings into the dovetail and tighten em down. I use em on A54, Suhl and Hall actions. I gotta be missing something here. bob
 
Hi Garrisone...I own 4 CZ, 3 – 452 Silhouette (.22 LR & .17 HMR), 453 American in .17HMR & an Anschutz 64 BR with Burris Signature Rimfire rings. Make sure you buy the Signature Rimfire Rings: (Black Matte High Rings# 420556 & Medium High 420554) with the synthetic posi-align inserts. They protect your scope from being marked up and with different offset rings will help you bring you back on target with out having to use your windage or elevation until the last few adjustments. They also ship in the same package as the 3/8” rings, 11mm claws to fit any 11mm dovetails...but they don't tell you that on any product info they have...but found out after talking to Burris. Hope this helps. They work great and hold very tight.
 
You must log in or register to reply here.
Back
Top