Search results

Maybe the cases were a little hard. Maybe cases not annealed down far enough past the shoulder. Some cases I made wildcats from had that problem. Maybe cases we are talking about being small and built strong, a little hardness is stopping the chamber wall grip. Big cases the hoop stress is much...

Straight wall cases are supposed to stick to side of chamber better on firing, so the improved wildcatters say. Someone on here with a lighter load and brass combo that has sticky bolt lift needs to anneal whole top half of a case and try same combo and see of the sticky lift is lessened. I'd be...

OK- Some powder, bullet, case, and chamber/barrel setups will give these kind of problems due to airspace in the case with lighter loads. As soon as loads were heavier and airspace less or none, everything ok. Airspace with some combos can lead to small SEE incidents. Secondary Explosive...

In our 12ga FH work we use some rifle powders in 12ga, and the limitation is dependable ignition with shotgun primers in that diameter of powder charge. H322 won't ignite dependably. You can use VV110, IMR4759, IMR 4227, RE17 with slugs and a good roll crimp on plastic cases and tight fit on...

Let's see, they must curve light rays, as that is all I can see, as the face doesn't register IE, bigguns curve time and space, which Einstein obviously used them to help figure it out. Ed