Search results

Not on a 2 screw action. If it was a Rem 581, then yes, where only 1 screw holds it. My guess. More on the subject.

What action is being used?

IMR 4895 - move to HDPE plastic, Black best. Shot some IMR 4198 that had red rust from metal can. Was not as bad as the 4895 can. Shot normal, after blowing red dust out of powder.

Brass Fired in other rifle, may not have a bolt face square to the chamber. New gun, new brass.

A for neck turned brass. B for unturned brass.

After cleaning, put rifle in rack, muzzle down. Any oil, solvent will drain out the muzzle, not into bolt.

The sooner the bullet is pushed off course, the bigger the group. Close flags over long flags. After the bullets stabilize, less effect the wind has on the bullets.

I like the idea. Ty. My 243 bushing should work with the 6.5 ? Have to try it. Using Redding Type S FL sizing bushing die. The Redding standard die, 6.5 seating stem was contacting the bullets nose. Had to drill it out.

Bare rifle $1200. With scope/mounts $1600. Retail. Must average 1/2" @100 yds or smaller. At auction $500 with orginal wood stock, no scope, Douglas barreled. https://www.horstauction.com/gun-auctions/gun-auction-results/january-4-2020-gun-auction/

Shaving bullet when seating & crimping at the same time. Standard seating die, that can crimp while seating. A ring of lead can be shaved from a 45 acp cast bullet when seating and crimping at the same time, if there is a die problem. On rifle, move the die up so case mouth is not hitting...

http://benchrest.com/showthread.php?82161-Sure-name-in-the-forum Ok. Joe Harris. ;)

Mine is 1970s single shot action 40x in 243 win.

My 243 Win My 1970s factory standard trigger is around 3 pounds. ​Single Shot 243 Win. Took a photo of my trigger. The instructions on adjusting is from the online manual i googled...

Photos of 40x specs. https://forum.accurateshooter.com/threads/remington-40-xb-h2.3998842/ And more https://forum.accurateshooter.com/threads/40x.4005075/

Oliver North Oliver North was paid by the NRA IN 2018, $ 1,377,617. Not a bad pay day, while it lasted. https://apps.irs.gov/pub/epostcard/cor/530116130_201812_990O_2020020617115747.pdf

The NRA is running in the red. It may not be around much longer. When the NRA goes, so do the guns...

https://www.thehighroad.org/index.php?threads/nra-says-it%E2%80%99s-broke-and-on-the-verge-of-collapse.839730/page-4 Non profits have to file with IRS. Its public info. https://projects.propublica.org/nonprofits/organizations/530116130 There are 5 ? branches of the NRA. Ca$h Grants are...

The 223 if a fun gun and cheap to shoot. One day i may invest in some Berger Bullets.

Leave everything else alone & test fire a few rounds.

10 rounds into an inch at 100 yards without much effort on my part. ( I did it twice) For $1200, buy it. But check to see if the twist rate is what you need for bullets you want to use. Gun had to shoot 1/2" before leaving the factory.