Search results

I know that it’s not exactly the answer that you’re looking for, but I’m presuming that you are trying to measure the width of the dovetail? With the set that you have use 2 thread gauge pins or a couple of harden dowel pins that will sit nicely in the male dovetail and measure across, this...

i have a shilen dga that has been bushed with 4140, i run reasonably hot loads and it works fine cheers

yep, the remington 700 tool is the one you want, got mine from sinclairs cheers

I’m thinking about building one of these as well, can anyone with this particular cartridge experience tell me how loud they are, as I want to tune a load comparable to that of a hornet, also recommendations on twist rates for 45 – 50gr pills Thanks

Several weeks ago I helped a mate sort out a load for his 6BR. Using AR2206H, Federal Match Primers and Sierra 70gr Match Kings the velocity spread over 5 shots was 67ftps, with no alterations other than changing to Remington 7 ½ Primers the velocity spread dropped to 7ftps Cheers

I do my load development on a 200yd benchrest range, I found that for initial tuning if I get it shooting .3” at 100 with an acceptable velocity spread, I don’t waste the barrel and go straight to 200, if the load is in tune the group wont open up. Then I’ll try a different pill or powder...

Brilliant, PETA caused alot of grief with our wool industry, should be more of it.

Sizing Ammo I know of a shooter down here who was FLS Federal ammo, as it wouldn’t chamber correctly in his Lilja match barrel with good results. It’s dangerous work though, he had several go off in the sizing die before giving up on the process. Tenex in Australia cost $35 for 50 rounds, for...

Hi All What bore diameter should I request, .215” or .217” for my Annie 1907 from Krieger Barrels, the finished length I expect to be 24” – 26”? Also what is the standard bore diameter for Anschutz barrels?