Search results

I just recently picked up 5K 210M's in the old gold packaging labeled "Bench Rest" as opposed to the new Gold Metal Match packaging. Were these primers any milder/ less hot then the newer 210M's? I'm having a problem with a new Remington 243 Win rifle with an 8 twist and a fairly long throat...

I have an extra Leupold 700 long action, long range scope base on the shelf. I have a short action I need a base for. Has anyone modified a 700 standard long action windage base to fit a short action by adding a hole to match the rear hole in the receiver and cutting the end of the base off to...

What is the average life of a PPC barrel for competitive accuracy?

Weatherby did contract J.P. Sauer in West Germany to build Mark V rifles when the demand was more than they could handle during that time frame. Maybe it is one of their blanks from when they went to Howa in Japan because of costs, and they sold off the remaining West German supply. I'm...

I use a sliding chamber type seater. No shaving is occurring that I can tell. Actually, the seating die was cut with the same chambering reamer.

Color for one. Do your bullets look the same color as your cartridge cases to you?

I never realized that gunpowder and pressure turned brass into copper, and that trimming .002 off a case mouth can cause such a large burr. I learn something new every day.

I kind of did that, except I just bent it a little to see if any pieces would flake off. They didn't. If you look at the picture, you can see a round narrow section from about 10:30 to 11:00. It actually is almost perfectly round and actually looks like a piece of solid electrical wire. I've...

Me either.....Want to buy it? I'll sell it to you cheap. ;)

I can't honestly answer that. I hadn't had any problems until I was testing a new powder in the rifle. I loaded 15 rounds with increasing powder charges with a known good seating depth from previous load development. Just so happens that it spit the last round at which point I was going to clean...

Is it possible when seating the core to apply enough force to stretch or weaken the jacket at the pressure ring/heal of the jacket? Maybe somebody threw a set-up bullet in the pot when they were made? Or maybe the punch when forming the jacket might have had too sharp of a corner?

One thing I might add is that the reamer has zero free bore with a 1.5° lead. I don't think that is the cause because I chambered 2 other barrels with that reamer and haven't had an issue from either one of them. The only thing that I can come up with is a bad jacket for whatever reason. So far...

Al, then wouldn't I see a case mouth that was screwed up or shorter then the rest that were all trimmed to the same length? I looked at those last 15 cases and nothing seems out of place.

Jeeeez Dude.....I cut the chamber and yes it is on axis within .0003 according to my indicator and no it doesn't have any torn metal, grooves or other wise in the chamber body, neck area or throat as verified by my bore scope. The head space is perfect and exactly on minimum. The neck length in...

:rolleyes: Roger that! And it figures it would have to happen to me. :D

Well I normally hit the mouth of the case on a piece of scotch brite after trim and chamfer to remove any burr that the chamfer tool may have left and the ring is clearly copper and not brass. So dang if I know.

a: Huh? The bullet doesn't touch the chamber. How would that cause a problem? b: Huh? If the chamber had a groove, which it doesn't, the brass would flow into that groove making the inside of the neck bigger in that area. How would that shave a bullet? Oxidation....why would anyone want to do...

It appears to be one piece. But with pressure, I guess it could be welded together. Don't know. It came out just like you see it on the 1st patch with Butch's Bore Shine. Hey what a great advertisement that would be for removing copper. ;)

Al, If you're asking about a donut, I don't see anything. The brass is starline which has a thinner neck then some other stuff. I measured the fired case and a loaded round and there is .006 difference which is a pretty big amount. The last round stayed centered but was about 2" high. The...

Brass was annealed, trimmed and chamfered with a VLD style tool one firing before. The bullets seated fine with no unusual resistance in the brass, no shaving of the jacket. The copper ring came out of the barrel during cleaning, after 15 rounds were fired from a new barrel with 100 rounds...