Search results

i did not mention it but i am sure several of you had thought about it. adding a chunk of al to the front of the stock change the harmonics and shooting went to schitt. vertical added. so now i need to do some mini load testing to reduce the problem. i am at the top end so need to tune down and...

i think mine is close to the lrb's i currently have. if you want low look at the current stocks by alex. i have stayed at 4" by choice, this rifle came with a 5" which i took off. on a side note i am currently at 16.95 lbs with the lens cover! built for the lite/17lb class. my other bbl is a...

this week i had a 4"x8" front end made for the rifle. the rifle as built was a laminated wood stock with the width at about 3.75..which was a pain as my other guns are 4". it also was a flat fore end, which tended to rock on the center of the bag. i had the 4x8x .5 plate milled thru the center...

stepping forward some more testing, loads hitting .25 or so and started fine tuning. yesterday in some wind i did more fine tuning... with a known load i went touch(000) , .003 off, .005 off and .007 off..all based on best groups from 000 and 5 off, 10 off did not do well. in the end. h4895 at...

that is aged bluing..not all do it but it does happen

yes it was very well run. they opted for 3 targets for each gun to speed things up. some people were a no show so that took it from 6 relays to 5. i like the idea of shooting each gun 2 days vs cramming one gun into on day. i am biased.i shoot there every aug.

so a jump sideways...to h4895 powder. i am over 2900 fps with the 130 jlk vld. did a short ladder to see velocities and then picked three and shot them this am. best 3 shot group at 100 was a 0.155, this was touching the lands..my normal starting point. i will load some on either side and go...

again, see my post..they will test wit what is actually available...widden gunworks is one, the other is in tx

i actually shot higher score than in my national win in '21...97 vs 96.25

arrange to have lot testing on your gun/bll'd action done at one of the big three( lapua, and two independents..some one fill them in) and then buy the lot that shoots the best

your comment is lost in space..no idea what you are talking about...eye protection nor hearing protect is not a pit requirement

MY REPLY WAS CLEAR TO MOST. there is lots of bs on the net. i have shot all of tula's/wolf's small rifle primers and sold all of them.

i did pure krap in light gun but much better in heavy. i did 5th over all in score...4 way tie at first, i was out by 2 points. my big improvement was in group where i typically suck. i did 6th over all in group with a 6.2 agg, giving me 4th overall in heavy gun. same gun and loads in my gun...

the results and eguip list is here https://www.mt1000yd.com/2024-ibs-1000-yard-national-championships/ a good time was had by most!

well i have worked directly with wolf. there is a lot of "i read on the internet" misinformation. as i said ,i have shot all three in ar's with no issues.

i have a long range single shot that was a 6br that i built into a mid distance 308. 24" 1/10 185's do well out to 800. i have a second with a 30" 1/10 shooting berger 175's which work past 1000 just fun guns cause i like 308 i use seb br tripod frt rest.

lets start with facts. wolf never made primers. they marketed russian primers made at the russian national primer factory, murmon(sp). in my years of selling retail wolf only sold srm small rifle magnum primers,(ncsrm non corrosive small rifle mag). when wolf took over the marketing of the...

your question makes little sense...so tell me what you want to know.

so here is a small update. it took 14 plus months to get a custom krieger bbl. gary ocock chambered it for me and i put ti together this week. no shooting yet as i have the 1k nationals next weekend. when i get back i;ll do some work and see if it will do what the heavy bbl did. ojai is back up...

???