Search results

Mysteries And Misconceptions Of The All-Important Primer Good reading. http://www.shootingtimes.com/2011/01/04/ammunition_st_mamotaip_200909/

Bullet pinched in Case Neck on Loading? 1.You may want to double check the trim length. 2. Does the neck have enough clearance to expand on firing? This may raise pressures also. 3. What powder are you using? Some lots may be hotter than others. Edit Add > From >...

The USPS web site lists delivery times for a 1st class letter as long as 9 days coast to coast. During the holidays, its longer. The PO money order can be cashed at my local post office, they have a machine to do this, but may not have enough cash on hand at the moment. Most incomming mail...

manufacturing ffl needed to assembly assault rifles for sale or distribution. From the ATF website

http://www.accurateshooter.com/cartridge-guides/223rem/

A hunter sighting in a 505 Gibbs is using a portable 3 legged shooting bench at my club. Its high enough that he can shoot while standing, when signing in the rifle. Then shooting sticks are used for practice.

Hodgdon & ADI Powders.

Military BALL POWDER® Propellants listed in order of burn rate St. Marks Powder (SMP) http://www.gd-ots.com/Brochures/BALL%20POWDER%20Propellants.pdf Powder Designation Cartridge SPI Igniter Artillery OBP® 126 .50 Cal. Blank M1A1 WC 814 5.56mm Blank M200 WC 818 7.62mm Blank M82 WC 815...

Powders MSDS Alliant Material Safety Data Sheets (MSDS) all powders. http://www.alliantpowder.com/resources/msds.aspx Hodgdon, IMR, Win.,VihtaVour Material Safety Data Sheets (MSDS) http://www.hodgdon.com/msds.html

Olin Win. = St. Marks Win. Olin powders were being made by Primex Technologies inc. in 1999. General Dynamics to Acquire Primex Technologies, Inc. Nov.2000. http://www.wwpowder.com/PDF/MSDS%20Files/Smokeless/Winchester/BALL%20Powder%20Propellant.pdf...

Powder-June 12, 2001 ATK(Alliant) and General Dynamics (ST. Marks) Form American Powder Company, Munitions Propellant Joint Venture. http://www.generaldynamics.com/news/press-releases/detail.cfm?customel_dataPageID_1811=13574

Did the 3180 (stuck bolt) expand the fired neck more than the normal .3305? I have seen slow burning powder, light charge, not expand the necks of 243win brass. Could the pressure spike come from detonation of the powder? Magnum primer being used? Bullet jamed into rifling or .005" off? Neck...

ADI & Hodgdon powders. Hodgdon > http://www.imrpowder.com/PDF/MSDS%20Files/Smokeless/Hodgdon/Extruded%20Rifle%20Powders/Retumbo.pdf http://photobucket.com/firearmsreloading

http://benchrest.com/showthread.php?49336-Berger-bullet-failure-test&p=384475 Berger bullet failure test

IMR4831, H4350, IMR4350-Weigh each charge.

Prvi Partizan There was a problem with some 308 brass. Starting loads caused excess pressure. Here is one. http://www.thehighroad.org/showthread.php?t=501655

Yes is my guess. CCI 400 was flowing back into the firing pin hole. Changing to Rem 7 1/2 showed no flow or pressure. Rem must be harder or thicker. This would be a defective primer. Seems to happen in all brands.

Link > http://thefiringline.com/forums/showpost.php?p=2737627&postcount=15

338 Win Mag Lyman cast bullet data shows IMR 4895- 249gr gas checked bullet-41.0gr/1835fps to a maximum of 46.0gr/2044fps. The maximum for cast is because above 2000 fps, you will lead the barrel, not a pressure problem. The 275gr. Jacketed data-IMR 4895-starting 54.0gr-2252fps...

Youth Loads & Trail Boss Call the Hodgdon powder company about Youth Loads using H4895. http://www.hodgdon.com/PDF/Youth%20Loads.pdf Trail Boss info- http://www.hodgdon.com/PDF/Trail-Boss-data.pdf