Search results

http://benchrest.com/showthread.php?82161-Sure-name-in-the-forum Ok. Joe Harris. ;)

Mine is 1970s single shot action 40x in 243 win.

My 243 Win My 1970s factory standard trigger is around 3 pounds. ​Single Shot 243 Win. Took a photo of my trigger. The instructions on adjusting is from the online manual i googled...

Photos of 40x specs. https://forum.accurateshooter.com/threads/remington-40-xb-h2.3998842/ And more https://forum.accurateshooter.com/threads/40x.4005075/

Oliver North Oliver North was paid by the NRA IN 2018, $ 1,377,617. Not a bad pay day, while it lasted. https://apps.irs.gov/pub/epostcard/cor/530116130_201812_990O_2020020617115747.pdf

The NRA is running in the red. It may not be around much longer. When the NRA goes, so do the guns...

https://www.thehighroad.org/index.php?threads/nra-says-it%E2%80%99s-broke-and-on-the-verge-of-collapse.839730/page-4 Non profits have to file with IRS. Its public info. https://projects.propublica.org/nonprofits/organizations/530116130 There are 5 ? branches of the NRA. Ca$h Grants are...

The 223 if a fun gun and cheap to shoot. One day i may invest in some Berger Bullets.

Leave everything else alone & test fire a few rounds.

10 rounds into an inch at 100 yards without much effort on my part. ( I did it twice) For $1200, buy it. But check to see if the twist rate is what you need for bullets you want to use. Gun had to shoot 1/2" before leaving the factory.

30-06 brass fire formed to 25/06 AI? Fired and put away dirty? Chemicals left from firing may attack the brass over years, if not cleaned before storage?

A variable 12x42 would be my choice. 36x is better then 18x.

Missing Flash Hole or Military term "spit hole" Old thread warning. Military thinks there is about 23,000 PSI in the pocket. No powder in case. #41 primer. Photo , no flash hole 30-06 http://forum.accurateshooter.com/threads/primer-output-pushes-bullets-into-rifling.3966017/

Bedding in front of lug . Leverage Effect? Bedding in front of the recoil lug may act as a wedge? The barrels weight becomes the lever. This may increase force on the action? How the barrel is bedded may make a difference? 1.Barrel, If bedded while free hanging, under its own weight...

You can not use a Redding full length bushing die to do the resizing, before neck turning. My 243 win bushing does not size all the way to the shoulder. I seem to get longer case neck life in 223 after neck turning and loading with a standard RCBS FL sizing die, with expander. Less metal...

Back in the 70s, the Rem 40x had a 2 oz trigger and the standard one available. I dont know what makes them different or special? My 40x 243 Win. has standard. The 2oz i handled would not stay cocked if closing the bolt hard & fast on an empty chamber. Google found...

Pressure and velocity SAAMI standards.

The Giulio Fiocchi, Lecco, Italy brass may have a different volume then Hornady brass? With harder bolt lift, there should be other signs, not just one. Velocity at 3774 fps/24" barrel, is whats listed for a Hornadys 40 gr V max bullets maximum @ Hodgdon. So 28.5 gr may be maximum for...

http://benchrest.com/showthread.php?98706-Neck-Tension See chart Post 6

Same weight bullet- different brand construction.= different pressure. Another interesting result was that while we were shooting the thicker jacketed bullets both barrels produced several blown primers. The .257 barrel produced 14 blown primers and the .256 barrel produced 5. There were no...