Search results

OK fellas I just saw that the Stiller fit barrels for their actions. This will facilitate my life. Thanks to all

My concern is the thread fit and tenon lenght, because he could make it short chambered and I adjust the headspace myself, as I have the reamer and gauges. But I am just thinking about it, I may be wrong.

Is possible for the gunsmith fit the barrel to the action (Predator,Alpine,...) without sending the action, or is this is possible only with BR actions(Viper, Borden BR, etc..) I ask this because will be easier request the barrel than send the action to the gunsmith, as i live outside USA.

Hello Mike, glad to hear you. This rifle is what you assemble for me at the end of 2006. I still have the second barrel untouched, but want to make the most of the first before installing the spare. After verifying the spring, I realized that isn´t strong as i thought. But the uneven...

Guys Here in my country, even a BR rifle is a stranger animal, let alone a borescope:eek: The cases are the same that was used before, but the plunger ejector can be the problem, as ther springs is strong( good tip Scott) I did not think of that before. Anyway, the first groups are...

Guys I have a problem and need your help. After 1600 rounds fired I decide set back the chamber of my 6 PPC. I bought a reamer from PTG with a complete set of bushings. My gunsmith cut off the old thread and redo the threads and chamber with care, using the tighter bushing( .2368" as...

Adamsgt I believe I can help you on that. Just send to me , but you must pay the freight... By the way,I live in Brasil:D:p

I may be wrong, but i understand this way... Custom chambers are normally in the tight side. If you do the test with the Wilson chamber type gauge, who I believe is in the SAAMI specs, almost any custom cartdrige will fit. If the intention is avoid ammunition with custom dimension,( and its...

I am thinking of change the barrel of my CZ 452 rimfire rifle for a Krieger HV #9 contour. What is the appropiate lenght to not stress the action? TIA Liseo

Quote quote} Maybe i can help before you get attacked again _________________________________________________________________ I second you , Tony

export I and some friends in Brasil do all businees with "National Gun" in Miami. Some months ago I and some friends have imported a lot of bullets,scopes, rifles. Ask for Jack Gonzales, it is a licensed exporter and good guy to deal. 305 642 2355

In yours opinion, how the HS vertical grip with aluminum block compare with McMillan line(A2,A3, ...)stability wise? Don´t want begin a fight here,please, I need opinion from those who have acess to both. Thanks

Maarten I live in Rio Grande do Sul, state in the south of Brasil. We have local matches here, with some guys shooting Sako rifles in 6 PPC with Hart, Krieger, or Shilen barrels. Two years ago I give myself one Bat rifle in 6 PPC. I am still learning how to read the flags...

Weaver T-36 Excuse for hijacking the original post, but i hope someone can help me. English isn´t my mother tongue, hope you guys understand my problem. I disassembled my Weaver 36X because the adjustment knob no more move the reticle as expected. ( is almost impossible send back to...

HovisKM If I live in the country who is the shooters paradise(USA), I cant see any reason to make 6 BR cases from .308 Winchester. But try be a rifle afficionado in some countries in South América:mad: I even saw some guys make .380 ACP cases from .223 Rem. cases.:eek: Life is...

About this question, would the difference in primers (largeXsmall) cause pressure problems or even accuracy problems? Liseo

I will take a close look to the Anschutz series. I see in theirs home-page some options. The model 1416 DHB heavy barrel, the model 64 MP R , the model 64 SB R benchrest. Since where I live I don´t have the option at least to look at these rifles:mad:, what of these models you guys think...

Guys Many thanks to alls who replied to my post. Seens hard to decide with so many good options. Is the Suhls a currently made rifle? Liseo

Guys Excuse my poor english, isnt my mother tongue. What is the best factory made (accurate) 22 LR rifle money can buy ? What your experience if you compare Anchutz and Cooper? If you change the barrel of CZ 452 with one premium (Krieger, Lilja,...) how it compare with these...

.335 to .336 bushings is what i use with Lapua brass and Sierra MK or Berger BT with good results.