Search results

With my custom 223 25 inches Krieger 1/8 tw barrel, I achieve 3000fps with Berger 80,5 gn FB bullets and 25,6 grains RL 15 and average groups are under .4 MOA

Hope soon I can try another bullets brands. About the scope, dont sure if my Leupold 45X or 8,5-25X50 will handle the recoil

Hi Dusty Yesterday I took the rifle to the range.. A changed two things at once, so dont know what of two affected the accuracy,if one or another or both. I changed the dies, as with mine the run out was .005" and with the new, the run out is .002" and removed the muzzle break. I have...

Keny My scope is NXS 8-32X56 with Badger MAX 50 rings As I live in Brasil, not so many components choices. We have only one powder suitable for this caliber. Isnt viable bring powder from USA to Brasil. Bullets and brass is possible The rifle assembly is fine, bedding seems OK. This...

Milgunsmith 120 rounds down the barrel. Chamber is 338 LM Tactical match, 1/10 tw Bartlein barrel. My friend rifle is a TRG 42 with 1/12 tw. Dont know exact throat lengh Will try at 300, and reduce the velocity to 2750-2800 fps for 250 grains SMK. Now I am getting 2950 fps with...

Hello guys I have a custom 338 LM rifle I'm not getting good groups. I can not get groups below .9 moa, 100 m. With the rifle from a friend in the same caliber, I can do .5 MOA. It would be the rifle of my friend above average or mine is that it is bad? What would be the expected...

Done

Greg and others With Berger 73 grains BT I manage to get groups in the .25 to .30 at same distance (110 yards) as I intend to shoot at 330 yards in a competition this weekend, I was wondering if it was worth losing a little precision in exchange for better performance in the wind.( This...

Hi In my custom rifle with 1/9 tw krieger, I tried the Berger 80,5 grains Full Bore at 2891 fps. Per Berger barrel tw calculator, I have a SG of 1,15, what means the stability is "marginal" Anyway, using bipods, I get groups in the .30" and .40" at 110 yards, without any keyholes, for 4...

SGS Just to compare these two cartdriges, my 6 BR is 1/4 MOA gun ( some groups smaller, some bigger) With the 6X47 Lapua, what is the accuracy potencial? ( if this even exist) The driver skill is out... Sorry if I'm being annoying, but I would make the right choice, and I count on the...

Asa Yam The problem is that for the rules, any BR case or its variatios arent allowed, as we already have one tournament where these are permited. thanks.

VinceB and others The 6X47 Lapua was my first choice, due the small rifle primer pocket and excellent Lapua brass, but after reading many complains in another forum about how hard is to make it shoot small groups, I am almost changing my choice. As the potential for small groups is my...

Hi I need a repeater rifle for paper punching 600 to 1000 yards in 243 caliber Must be a repeater, (6 BR is out) Accuracy potential is the first requirement, and good usefull barrel life is good too. Seems my decision must be among 6X47 Lapua, 243 Winchester and 6 SLR My first...

Sparatore I have Sako 6 PPC brass and Lapua fireformed brass. Lapua brass handle hight pressure without problem, the pocket become loose soon with sako brass.

Thats what I figured.. If I clean the necks, feel less resistance to seat the bullet

Thanks guys for the tips. The QCTP just began the long trip to my country.

Thanks guys I ended up buying one BXA model from CDCO. As it will be used only for weekends gunsmith work, I believe that he will fulfill the mission Thanks again

Hi Sorry if this was asked before, but my search dont worked. For some hobby rifle work on 14X40 lathe, what will be a good QCTP wedge type who isnt as expensive. Aloris seems fine, but above my budget. Thanks

A friend of mine broke the extractor on his 770 rifle. He sent me photos, but they arent clear enough. So, the 770 and 700 use the same extractor or are they different?

OK guys, I will try Neal stepp or even weld, maybe Tig weld.