Search results

Let's hear some thoughts on this.......... https://www.youtube.com/watch?v=Za91qyhida8&feature=emb_logo

If you have a load worked up and decide to try going down .001 on the neck bushing should you change anything else? Back down the powder? Leave everything else alone? Or start load development all over? The load in tune now isn't a max load but probably within .5 to 1 grain of max.

Thanks Scott.

Bart who? :rolleyes: Just kiddin'.

Just started load development....sweet spot at 30.5 grains.

Has anyone tried IMR 4350 in a 6BR with a 95 VLD? I'm trying to get a fuller case then with varget and stay with a stick powder. I'm half thinking that IMR4350 might be a bit too slow but I thought I'd ask.

Does Remington use aftermarket barrels on their 40X's or are they standard Remington barrels? I hear from someone at one time they used Hart barrels. Don't know if that is true or not.

Yes....as long as you don't have a huge amount of inletting to build up.

I'm thinking it might be a good candidate to try lapping the bore a bit with a lead lap. I've never tried lapping yet, but what the heck.....it's just a barrel.

I've got a factory barrel that copper fouls very badly but just on the lands for the last 2-3". The grooves have no copper what so ever. I tried iosso on a patch after I had the copper cleaned out but it didn't seem to make a difference. the barrel feels a bit tighter at the muzzle running a...

Because it's just un-American! And then you have the countries that outlawed guns. Now ask yourself the same question. ;)

Exactly what I think as well. Pick up what is left of the old thread in the middle and have at it.

I finally found what I thought I had seen. Bob Dunlap... https://www.milsurps.com/showthread.php?t=49179 Part 2 talks about shape and reasons why.

Is there a proper radius size for a firing pin tip? From what I remember, it isn't suppose to be a complete radius (half ball shape) but a larger radius then half the tip diameter.

Ebay has a Metal Tooth Gear Head Box 5GN Speed Reducer Ratio 12.5/1 which should be about perfect with a 1750 rpm motor if you can adapt it. https://www.ebay.com/i/321651052339?chn=ps

I can't speak for that one. I have a lyman bore scope and am very pleased with it.

Mr. Wilbur, You're in my prayers. I'm very sorry to hear of your loss.

Exactly right....6-40.

Got it Mr. Dave. Thanks so much. Now to get the old one out.....

Mr. Dave, Thanks. I'll email you. I will need to drill/retap. Do you know the size off hand? TPI? If not, I can check it when I get it. Thanks!