Search results

Do you think it's because the snow birds are coming to shoot their rifles in the match?

80 gr HPFB I see what you mean mike. I'm just wondering exactly how much more of the v v 133 is needed, to adjust the chamber depth to gain the correct amount of powder, Maybe it just a small amount to gain the 1 to 2 grains some people are putting into the case,s with the long...

80 gr HPFB I think there,s a longer version of the PPC already tried. The Borden BPC if I remember correctly. If I were going to improve a case like the ppc to hold more powder i would just chamber the barrel a little deeper and see what happens. If it works out then...

80 gr HPFB I'm not sure about the specs on that reamer. I saw it on the specials page , Thought about it a bit . when I went back to check again it was gone. I like your specs only I like a slightly small neck.

80 gf HPFB I know you have been playing with that case quite a bit in 30 caliber. I've seen a 6mm grendel reamer on kiff site , not long ago. When you go up in bullet weight you must also go up in jacket length. A flat base 6mm at .900 has a good length bearing...

80 gr HPFB I check out stability . Here's what i found 2,800 fps 1 /11 twist 1.500 well into the green 1 12 twist 1.261 yellow. 1 13 twist 1.074 in the yellow. From what i can see the 12 should work in...

80 gr hpfb I was thinking of building the same thing mike. someone just beat me to the reamer that was on kiffs site. I think the 12 is a good choice. If I do i'll set up my dies for a flat base 8 ogive or 10 ogive I'll have to check the stability on JBM...

221 fireball The 221 fireball was a nice little case to work with. The xp actions were used on Benchrest rifle,s for quite a while. Its a 600 length action Now called a model 7 xr 100 in single shot More or less a smaller version of the 40X action. IT was chambered...

6mm ppc the 13.5 is a good choice so is the 14 for lighter bullets Ive seen possible world records shot with a 13 too. I like the 13.5 twist.

primer question :D:DYes and if it cost more it has to be better:D

Merry Christmas to all of you '''

is this Bs or what That,s what you get by legalizing Weed,s

is his BS or what? I live in New York state. Knowing how people in the down state area are I bet they are. They are way different then the rest of us around the state. I wish That area became a district like The capital region. I'm tired of being out voted and having no...

practice screamer Nice group really nice. I can't tell you how many I have shot like that over the years, The sad part is it doesn't count but It does show you what your rifle will really do , That's a plus and a confidence builder' Nice work'''''

original Homer Culver Powder Measure I guess you might say what ever you can get for it, More then likely it's a Lyman 55 converted by Homer. New Harrels are going for about 200 and up. I would say on my best guess about $125 to $150 to the right person

sako 220 r ohh ok Mario Hey great Mario sorry for the confusion. There was some of it on accurate shooter a week ago. I still have some here that i haven't used in a long time It.s very very good brass.

Sako 220 r Those are good powders but not what we use these days. Norma 201 has changed quite a bit and so has H322 If your going to try and use those again buy only 1 pound at a time' Try some of the LT 32 that a lot of us are using and some Vita n133. Those...

sako 220 r Have fun with them But remember they are a balloon head case, Watch your pressures.

Old benchrest rifle value Ted Boughton was a well know gunsmith from Rochester NY. He was well know in the area and in benchrest here the east coast. He shot with many of the greats of the day. I Clyde Hart, Bob Hart ,MR Colins, wally Hart, Ed shilen , Warren Page, Mike...

old benchrest rifle 222.5 one of Ted Boughtons or Ed shilens brain child/ It has the capacity of the 223.. It is the parent case of the 223 . the difference is the short neck on the 223. Easy case to make too. Just push the case shoulder back on a 222mag case and trim...