Search results

OP, As OliveOil stated..... You de-burred a burr from inside of the case neck into the case. Tumbling the cases would have removed it. Loading & firing the case...removed it.

A mills/vice A drill bit(undersized) A box cutter(router bit) 2 line levels Start inletting

rsmithsr- Let your finger do the walking....across the keyboard for your required simple task of inletting a blank- Alex Sitman-Master Class Stocks Carl Bernosky-Carl Bernosky Shooting Sports to name a couple...from my fingertips

alinwa, Check SAAMI specs, or the TM, since the 50BMG does NOT operate anywhere near 100,000 psi.....w/o a Bbl obstruction! You're basically dealing w/ a 30-06 case enlarged/magnified X 2.

To fix your botched SAKO extractor issue- Press fit a piece of drill rod in the extractor pivot"thru"hole. Fusion TIG weld pin. Machine for pinned mini 16 or m16 extractor, depending on SAKO width machine work. Fix the handle TIMING issue. Done At how Rimrock extractors are installed...

OP, Depending on handle vintage- G prefix serial numbered receiver to present RR prefix receivers. The above mentioned handles are of "Short Cam" design as I've coined them. Einstein &/or Houdini are incapable of TIMING said handles. w/o other issues addressed...FIRST. The longitudinal inserts...

rebs, what do we do ? After reading this entire thread my question is what can we do to save our beloved country ? As I previously posted- There are 10's of thousands in this country that need & deserve Columbian Neck Ties as the aforementioned is the ONLY option to STOP their MENDACIOUS...

OP, Are you looking for a LH Bolt Stop Spring? If so the LH spring is a mirror of a RH torsion spring & are not interchangeable. Bob1949, The provided link, bolt release is for a Tubb T7T 2 stage trigger group.

GeneT Dan, is that any Sako extractor conversion? I've wondered about them, but you're in a position to see many more than I ever will... GsT Gene,not any SAKO extractor modification...only improperly machined SAKO extractor mod'ed bolt bodies. Wayne Shaw Gene, I may be wrong, but Dan looks...

For starters- There are 10's of thousands in this country that need & deserve Columbian Neck Ties as the aforementioned is the ONLY option to STOP their MENDACIOUS espionage ,corruption ,lies & racist B.S. F.J.Biden,his family & his appointed Administration. M.A.G.A.

Pete, P.M. replied. As per a year ago- Your SAKO extractor modified bolt w/ thru hole for extractor pivot allowing witness to the f/pin assy is a refusal of services from me...last year...this year...any year. IF,you continue to shoot w/ said bolt in it's current condition- WEAR SAFETY...

OP, On any Rem 2 lug bolt, Rem bolt/handles are TIMED into battery & NOT for primary extraction, depending on handle vintage said bolt/handle may be .080" to .150" out of TIME radially. There is more to the equation than just moving the handle forward, since it's the rotational factor that...

alinwa, In the good ole days, w/several still in possession IMR 5010 pull down powder @ $28/8Lb. 647 & 700gr FMJ BT @ $1.00 each VV 20N29 @ $170/8Lb. 50BMG Rufous projectiles & rounds are saved for "sentimental" reasons. I do not shoot any sabot (slap/slap-t)rounds thru my bolt guns...

alinwa, With 30,000+ #35 primers on hand,I'm good for the time being(<$60/500 <$300/2500) 50BMG flash holes are .125"/1/8" diameter. 50BMG primers weigh approximately 20grains, other centerfire primers weigh approximately 1 grain. The LRMag primer sleeve may need to be a cup w/ .075" flash...

alinwa, Do you still believe a Columbian Neck Tie &/or a Curb Stomping is out of order? (there are 10's of thousands in the USA that rightfully deserve either of the above....options)

aline, 5/32" ball bearings- McMaster-Carr.com Mutant "E" clips are proprietary to Remington....only. "E" snap rings will retain the parts...but will not provide the correct tension for the detent spring.

alinwa, OEM Rem safety lever will have a hole in it to allow the safety lever to break off if caught on something. Rifle Basic safety lever does not have the hole. Acquire some 5/32" ball bearings for the safety detent as the Rifle Basic are plastic. Ensure the detent spring is not hung up in...

Friends of the Original Constitution https://friendsoftheoriginalconstitution.org watch video get educated sign the Declaration of Restoration pass link on to any/all Patriots Deep State/Blue State Dems-GFY ANTIFA-GFY BLM-GFY Illegal Immigrants-GFY

2 early Shilen's to date. Both housings were .014"+ narrower that the receiver's machine work. The above would bind the striker/cocking piece w/ trigger group in hand. Receiver machine work was in specifications. 2 strikes...both returned for a refund.

OP, Mic your reamers as the web dimensions between 220 Russian,PPC,6.5Grendel,7.62x39 varies a few thousandths.