Search results

  1. R

    How's lilja these days?

    ok...i have 3 lija 30 cal bbls they are on 300 win mag and 308 win, not on br rifles. the top of short range br ibbls are krieger and bartlien. i would do a 30 br i have a 6br but two 30 brs... you have a pm oh and the bbl i ordered from krieger with a 14 month lead time took 15 months.. i...
  2. R

    Action screw torque setting question

    for your rifle it may be true, but for competition rifles, repeatability is the clue, and that includes known torque
  3. R

    Action screw torque setting question

    i'd ask tom but i have never seen any that high, ii use 65/55 typically on bedded/pillers
  4. R

    i built another 308

    so i went back and shot 100/200 and 300 with that load to get zeros. all went well with new brass. today was a 600 yard practice day on the 1000 yd range at ben avery. all shooters were on e targets and Bill Fuchs(sureshot tactial) allowed me to shoot on his. first shot was a litle low, i...
  5. R

    we need a humor forum.....until then

    SINCE ... SUPPORTS GOT THIS MOVED, HOW ABOUT WE MOVE IT BACK..there were more votes to leave than there were to move it.......a million views cannot be all wrong =========== MODERATOR'S COMMENTS - YOUR PREVIOUS POST ON THIS THREAD WAS DELETED DUE TO NAME-CALLING AND TO AVOID GETTING INTO...
  6. R

    1000 yd br match at three points/tucson rifle range

    Light Gun Group Agg: Light Gun Total Score: 1) Dave Osborn 4.521” 1st Relay 1) Bill Warner 135 – 2X 2) Bill Warner 6.688” 1st Relay 2) Roger Bingham 134 – 2X 3) Dan Billotte 9.208” 2nd Relay 3) Dave Osborn 131 – 0X 4) Mike Billotte 10.271” 2nd Relay 4)...
  7. R

    we need a humor forum.....until then

    well lets see, over 1m views, over 2000 posts. i think someone had a good idea, yet most here never liked the chap... so much for their taste..
  8. R

    ppc brass prep??

    well i have learned that one of the top shooters has been bringing his AMP to the range and anneals EVERY TIME!, and another anneals every night like i was suggesting.
  9. R

    ppc brass prep??

    there are lots of people with lots of opinions. some based on random data, others on actual application. i shot rws 300 win mag in my first 1000 yd br rifle. i bought 4000 pcs of brass( 1k four times) and sorted each lot. i kept two lots of 100 that had a spread of 0.1( plus or minus 0.05)...yep...
  10. R

    ppc brass prep??

    i am sort of new to short range 6ppc shooting. i was at the range last week and a known shooter shot some just anneal brass vs not annealed. simply put the annealled out shot the other by a bunch. so..i was considering how to take advantage of this. i currently prep about 25 pcs at a time and...
  11. R

    we need a humor forum.....until then

    born raised and original lic in ca. 5 cars and you have to pull over, but both of the other two laws apply also. and you can leagally go FIVE miles over the speed limit to "safely "pass a car....in ca signs say 45mph,,,that is a reccommendation, not a limit, if it says 45mph limit, then it is...
  12. R

    30br question

    al, i use about .007 on comp guns. no room for a carbon ring. i anneal and trim every time( only ppc does not get everytime anneal, every day)
  13. R

    we need a humor forum.....until then

    actually in most states it is against the law to "impede the flow of traffic" some states require on to "drive on the right and pass on the left" getting the law enforced can be an issue..( the impede the flow of traffic..has no speed limit written in)
  14. R

    30br question

    ...sinclair/brownells sells a leaded steel slug theat fits in a shortened case. seat it long close the bolt, eject and measure. the slug is close to neck dia on the free end
  15. R

    30br question

    harrells needs 3 cases fired full strength 3 times. i simply use a bunch of fast pistol powder WITHOUT A BULLET to blow out the neck form a shoulder. again this is for long neck chambers. find out what you have short neck, is fire form with a bullet. for a club match your good to go,,,is it a...
  16. R

    30br question

    i too shoot barts112's there are 2 excellent powders h4198 and lt30. i am on 205m primers but have tried others.. i fire form without a bullet..it depends on the reamer. i have long brass to match the neck on the chamber. your first shot with the brass needs to be solid not wimpy. 40k plus...
  17. R

    i built another 308

    so moving forward with only new lapua palma brass, sized and neck expanded, i tried the loads that had worked with the prior lot of brass. 2 foulers at 42.8 of 4895 and then 5 at 42.9 and 5 at 43.0. the first 3 of the 42.9 went into one small hole...i stopped and had lou murdica look at it...
  18. R

    New Members, Existing Members Who Have Moved On, and Existing Members Who May Be Scammers/Spammers

    you are going to be busy..there are a ton of them ( look at my ignore list most of those are scammers)
  19. R

    1000 yd br match at three points/tucson rifle range

    april 12 in the am...probably 7 am
  20. R

    gun show at PRESCOTT AZ sunday

    i went today and left some unused treasures with new owners. wanted to go to the shilien "lunch", but never got confirmation on the road condition.
Back
Top