Search results

Mike, I in no way intended to discredit anything you posted. I was just answering the op with what information I know. I'm not sure what the playground insinuation is, but I have been here since pretty much day 1. I have pages of data and information from analysis and tests I have ran through...

Here is my take on this, it's only my opinion, but as an engineer, I think at it from that standpoint. 1. There is so little recoil, that almost no force is needed to keep the tuner from moving on the barrel. Therefore, almost any attachment method will work. 2. Threading the muzzle...

I have banned (actually Hozzie has) about 3 people in our time. They were all so over the top, it was necessary I guess. I am the kind of guy what will let people act the way they do. One good thing about free speech is that you can say most anything you want. The caveat is that you have to...

If you are taking about my site (RA), my membership requirements are that you are interested in rimfire. I don't like pulling threads because it is important for the masses to see everything about a poster, good and bad. The statement "Kiss the ring and swear your hatred for Calfee to be a...

There will be more detail. Until then, same exact body as 2500X, same barrel fit up, same loading ramp, same pretty much everything except stuff hidden in the bolt. They are far from gone if anyone wants one. The whole "everyone's praying for one", seems to be a pretty small everyone. The...

For more information, go to: https://www.rimfireaccuracy.com/Forum/index.php?threads/new-2500x-pas-action.29982/

Great minds think alike, however I am not sure either of our minds qualify!! :cool:

I think KSS sells a thread adaptor and a tuner that fits it already. Give them a call.

Like I have said in the past I started a batch of bolt bodies and firing pins about 4 years ago. I run out of mill time and didn't get the pins finished. I was just going to build them because some customers wanted them and at the time, a sale was a sale and a service to the customer. About...

I agree with you that it is better to open up the tuner. I would also. All that being said, HOW MUCH causes an affect? 0.0005, 0.0050, 0.0500, etc. If you sand the barrel to polish it and accidentally sand more on the end is it degraded. I have had a tuner fit a little too snug to my...

Shilen taper laps their ratchet barrels. They straight lap the octagons. They will not supply an unlapped blank to anyone. I do not lap on the ratchets. I taper the octagons myself.

I need to clear something up because I have had a few people ask me about this. What my plan is on keeping the best 3 for my guns IF they are better than barrels I already have. I fully expect more than 3 of this batch will be top notch barrels. The whole run is an experiment where I have...

You asked I would start with a 2500X RBLP action, Muller 8 barrel, Rotex low profile Dymalux stock, BixNAndy trigger and Holeshot Tuner. I would then top it with a Nightforce 15x55 scope. In general, anyone assembling a gun from these components can just put it together and get about 90% out...

Yea, no where else does either. Over on our side of the world it is much more like the top pic, maybe a little more rustic yet.

It kind of boils down to the definition of accuracy. Some people think accuracy is how good the good shots are. That is where the 10 shot thing really shines. A really bad shot doesn't really hurt that much. In ARA a bad shot is recoverable, same in PSL. It really hits hard in IR50...

There is very little difference between the PQP and the Pappas. The PQP area of the delrin slider is a little more rounded where it meets the stock. Both are of the same basic design. They all fit the fulgum top adaptor. I would get whichever one you can find in stock. I think KSS may have...

I think last time I looked he had Penrod listed on the equipment list as gunsmith. Maybe Mark has some information you may be interested in.

I use 4 flag setups. For me, a setup is a flag stand with a dual vane wick style flag on the top and a Besche windicator directly below. I use a 5 lb barbell weight on the bottom to keep them from blowing over. I like the dual vanes as I can read direction better with them and I don't like to...

All of the Holeshot Cleaning rods are 17/4PH stainless steel. We start with 0.187 rod, centerless grind it to get a smooth surface finish and them heat treat them to Rc 42 and Melonite treat them after that. That leaves the surface about Rc60 and it will never gall, stick, etc to the bore...

For my actions, I like the 1 piece picatinney setup better. You have a large variety of rings to choose from for one big thing. The other is the alignment of front to rear is always right. The dovetail blocks are a little tougher to get exactly right. In the end, I think the pic rail is the...