Search results

First, I respectfully don't agree with you above statement. Should a bullet be correctly molycoated, one can recover shot bullets which are still coated inside the land prints and everywhere else. I do pay a lot of attention to degreasing THEN removing copper oxyde on bullets prior to...

Ya have no LOGIC. 1+1=1 !

Personnally, I am just kidding the owners of the ChtoingggPlasticGun. All my buddies belonging our IPSC-Rifle section are using ARs. I am the sh*thead using either an AKS74U or a wz88 TANTAL. I often kid them for their plastic guns (being anyway all alumina) and they kid me for my steam...

Nothing my AK74s can't do ... better .... as the reloading or liberal trick. Except for the girl with the fish tail and naked boobs. On that point, the AR seems superior. AKs can't do that.

He wrote me once he was getting old. He's probably sleeping in his rocking chair near the fire place, a blanket on his knees .... and his hands still in the motion of cutting cores ...;););)

I have tried the Magtech 7 1/2. For me has strong as CCI450. I will not make any supposition with regards to cup thickness or cup material strength. I have no measurement for this. I tried to use them on an old small firing pin Panda and had a lot of misfires. Meanwhile, have no misfire at...

And what about primary extraction caming ? This is a lack on many, if not all, including Schmidt-Rubin K11 K31. So ... Fully sized case AND light load ...

Pinched barrel was used on the PGM Precision Ultima Ratio back in the '90's. As far as I know this rifle, which was extremely advertised at the time, keeping a reasonable receiver diameter, and a reasonable barrel extension thickness ends in a very skinny barrel trunion. The barrel extension...

Kalash ?? bullets ?? If the bullet you wanna resize are military issued (ak kalash bullets), you will probably have a very HARD time with the steel copper washed jacket and the steel core. I have done a lot of copper jacketed / lead core swaging from .224 to .22105 usng a RockChucker. Even...

same but 660 yd That was also many many years ago. Target frame was made of 2 doors standing on an olive tree. The rifle was a factory Anschutz with regular scope mount and a lot of hold-over. The hardest part of it was to find that damned Lapua 60 gr subsonic and extremely still mornings...

your health If you shoot a rifle with the muzzle inside a small room, even sound dampened, watch out for the repetitive pressure blast on your eyes. You will have to wear ear plugs AND ear muff to protect ear and brain from concussion (human skull is very thin in ear area). Think ventilation...

Ed's Red I have been using Ed's Red formula for some years now and I am happy with the result. For those who have used it, how would you compare it's efficiency with regards to above mentioned cleaners or other commercial barrels cleaners ? Thanks.

Thank you Thanks for your inputs. @ Centerfire : that web site seems not to be available from France. @ davejones : yep, I knew that thread already. One that helped me make my purchase decision. It is amazing to read at post #69 that the barreled action was put out of the stock at the...

Hi Gentlemen, Just bought a first hand Marlin MR-7 in 30-06. (RG, just stop laughing at me please ...;);) that gun just jumped in my arms, I couldn't do anything) I would like to remove the barreled action from the stock to clean, inspect and grease. I can't achieve it. I took the 2...

A long story .... Back in the 90's, I purchased a 6PPC micro seater and a powder measure at Neil's. Some years later, I purchased a micro chamber die set for my 250 Ackley and I remember a fine Lady on the phone very kindly explaining me I did sh**ty on the collet diameters choice. Of...

No article. If I remember well that guy shot an AI in 308Win and he wanted to change the original brake for whatever reason. Maybe self-spotting. His way through the SureFire "fit and tune" had been long.

THIS ^^^ Experienced it first hand many years ago when using steel bushings to reduce LR to SR on 308 Win and 250 Ackley. That was wayyyyyyyy before Lapua Palma SR 308 brass.

Remember a guy who had a SureFire brake installed on his gun and spent a hell of a time to tune back to accuracy. At the first trials, a 12 gauge 00 buck shot was more accurate than his rifle. He had to use various shims to movet the brake forward and forward and re-re-re-tune his loading...

"How much" can vary from almost nope to full catastrophe, depending on many factors such as additional weight at the muzzle, primary wave handling, perfection of alignement on barrel axis. I did met a clamshell type brake that made a good gun group from 5" to 50" at 660 yd. That 300WM gun was...

I do not pretend to hold the Truth in any way. Just bring my 0.02.