Search results

  1. B

    Probes

    what ever you settle with and read well that what you should use but the daisy surpasses all.
  2. B

    another thought problem, NOT gun related

    only if wind comes over or under the flaigs do you get high or low with diagonal. Actually Bill, it happens on any range at any point on the range. A bullet "blown" to the left will always rise and a bullet "blown" to the right will always fall. It's the same mechanism as "spindrift"...
  3. B

    another thought problem, NOT gun related

    But Bill, a bullet blown to the left will also rise above the aiming point while a bullet blown to the right will impact low :) ONLY IF ITS DIAGONAL.
  4. B

    another thought problem, NOT gun related

    also rem the lay of the terrain
  5. B

    another thought problem, NOT gun related

    that only pertain to the lift of the wind if it is coming off the ground levet if it is coming down above the flaigs it is oposite good luck watch closer . Thanks for pointing that out. some times depends what wht part of range you are on.
  6. B

    another thought problem, NOT gun related

    But Bill, a bullet blown to the left will also rise above the aiming point while a bullet blown to the right will impact low :) THAT ONLY PERTAIN TO THE LIFT OF THE WIND IF IT IS COMING OFF THE GROUND LEVET IF IT IS COMING DOWN ABOVE THE FLAIGS IT IS OPOSITE GOOD LUCK WATCH CLOSER . THANKS...
  7. B

    another thought problem, NOT gun related

    such what you see at kelbys.
  8. B

    another thought problem, NOT gun related

    UP AND DOWN BY LETUP AND PICKETS OR DIAGINAL MISREAD AS LEFT AND RIGHT.
  9. B

    2021 IBS Group Nationals - No prepared food available

    maybe due toepademic going around.
  10. B

    Bullet Making Dies

    to do what i wanted i have 40 some presses set up in my shop. I finaly figured a better way thank for the reply .
  11. B

    Bullet Making Dies

    will do all three steps without takeing die body out of press.
  12. B

    Bullet Making Dies

    also new designed presses and ejection frames. Got rid of threaded rods in the waynew presses will do a million cal just one press.
Back
Top