Search results

I'd be interested in your findings once you get a chance. Having said that didn't you just send a gun or 2 to the Lapua test center? I'm assuming you found a lot or 2 to buy meaning it shot pretty well or even better than a Eley lot you have ? If you sent a heavy gun do you know if they remove...

Tim, I've never seen any major difference other than a click or 2. But then I'm apt to do that any given Sunday so.... Is that what you've found?

Data? No, I don't have any data. When I said twisting what I meant was willing to move it. I have a base tune I'm comfortable with for example. At the beginning of a target when shooting sighters if I see what seems to be a little vertical, I'll go up to a horizontal line on top of the target...

I'm guessing the flattish one's are where your best groups are? That's what I think I'd stick with as it would seem that is your "window". Another thing I would look at on your perceived best settings is to find which are repeatable in very different conditions, i.e., weather, wind, etc. If so...

A trap I fall into is being to relaxed when shooting at my home range. I'm too relaxed & my concentration suffers. Often times I'm not shooting my "main" rifles or ammo, experimenting with this or that & just yucking it up with the guys. Probably the worst approach one could take as to many bad...

I've heard of somebody shooting a 250-0x once. That's gotta be extremely hard to do! Probably equally as hard a 250-25x. I think I'll try this summer :) Keith

Post Chamber Lap Is a post chamber lap same as "finishing" a chamber? A little embarrasing but never having done one or knowing how to attack it I thru a stub in the lathe, reamed it, wrapped some emery paper around a 10-32 screw & had at it. Certainly looked alot better & couldn't see any...

Tim, I made one today & checked some of the few lots I have. One of my best lots of Eley was on the long side compared to others I had by as you mentioned, about .010. Same with some decent shooting lots of Center x & Midas I have. Figured I may be onto something. I'd got some test lots a couple...

As it turns out mine wasn't bored deep enough. It looks like mine is engraving .050+/-. My apologies if this caused any inconvenience. Keith

I think Joe Chacon makes them. You can find them here https://04459f5.netsolstores.com/jnlprxiiituner.aspx Keith

Tony, I've watched the video a couple times & fail to see where it dispels any myths. I saw where he found the engraving on the 2 barrels. Furthermore, & I don't mean to discredit the guy, but his accomplishments in rfbr, or anywhere else, are what? Its plain to see you're still worked up about...

Tim, you've hit the nail on the head in regards to me. I can't tell you how many times I've shot a dozen sighters before going to a record bull, including the sighter next to it, ALL 10's or X's, & shoot a 9. I might as well pack my gear up cause I'm screwed for the rest of the target! It pisses...

Good hearing from you Ray! Are you still doing the rest mount spotting scope stands as well? I see there are some copies of your flags out there & thats likely where the questions came from. Pretty classless thing to do imo. Keith

I'd read about it over on RA but think its awaiting approval from Jason. In any case,...again:rolleyes: Great Shooting Bruce!

I agree with Tad & Kevin here in that it was probably done to get the O.D. concentric with the bore in hopes that when the tuner was mounted the I.D. would also be concentric with the bore. I re-crowned a barrel that didn't shoot to my expectations. Mounted a tuner & indicated on the i.d of the...

Should have mentioned mine is the factory barrel too. .930 straight until the swell out at the muzzle thats 1.010

Butch, I have 1913 w/ mid barrel tuner & Harrell's. Its set on 152. Not sure we have the same contours though. Keith

Check with Mike Ezell. Otherwise maybe have a local machine shop make an adapter. Keith

I tend to think crown placement is more important than the chamber itself. When I did my 1st barrel years ago I didn't like how it shot out the gate. I'd bought 3 different reamers so I cut the chamber off & used another reamer & cut 1/2" off the muzzle. The gun then shot well enough & was...

While the barreled action is in the lathe I put an indicator on the back of the bolt with the fp resting on the case with a pulled bullet & dumped powder of course. My zero will be ,200. Cock the bolt(this will give fp travel) & fire it. Where the indicator stops under .200 is my measurement. Keith