Search results

The Reason Is Newbi There is a reason the 6ppc is most popular in short range BR. Their the most accurate!!!!!! Accuracy is addicting!!!! Be careful, you might get hooked. Welcome to the "HOOKERS"world. CLP

"Clickers" Kyle In adequate sizing the base of the brass leads to 1.) Clickers 2.) Loose primer pockets You did not state what "problem" you had with the #4 die???? Solution to above 2 problems is proper sizing die!!!!! Having been accused of being thrifty I would retry the #4 die, just my 2...

We can visit at the Super Shoot Hopefully parked south of main reloading barn. CLP

Resizing Brass Jackie You are correct the dies commonly used do not size the base/web area enough!!!!!!! Jim Carstensen specializes in making dies that resize this area. Also Harrell’s die # 4 does a good sizinging this area (6ppc)(for me) My thinking is preventing excessive growth in web...

Case Lip Chet Does that lip re-occur/grow back with repeat firings (If so how many firings)?? Cecil

Rusty Pete Were located in Iowa. The Ice just left the rivers/lakes a few weeks ago and the Mississippi is still flooding from the spring snow runoff from further up north. It was our 1st match of the season. Low 40's when we started. Yes some wind but was manageable. Some of us couldn't find...

What superlative due you use when someone just wins it all!!! His new gun and stock he built had their inoguration at this match. If he shows up at your range get ready for the battle!!!!!h

Wayne Another thing to consider Start with a case that has been fired at least 3 times(Its now expanded to its chamber size) Measure the diameter of case at 0.200 from web You need to resize (Shrink this diameter) by 0.001/0.0005 each time you resize the case Some dies do not size the brass down...

Chet and Fellow Shooters After bitching/complaining/arguing/telling Chet its a fluke I got it figured out(for me). A re-manufactured insert (With deeper groves) has improved the drop time for me from an average of 30 seconds to 15-20 seconds. (LT-32) Also noted that to get those speeds if I...

If your shooting Benchrest you will need to get the rest as close to the front edge of bench to keep the muzzle in front of the bench(A rule of NBRSA and IBS). This probably requires one to have the middle leg pointing backwards under the Joy stick. They make a short rear leg which does not...

Speed-Up Chet Not having a lathe (to make up your insert) would a straw from McDonalds help any?? Any other easy fixes you recommend to speed up CML??? CLP

And the winner is Buddy Ross Congrats on the win. CLP

Good/Bad/Ugly Good Friday warm up was great weather for February in the Midwest Ground was not frozen so could put flag poles in ground Temp in upper 40's--clear skies--slight wind Bad Saturday was overcast and fog/mist at times with some sprinkles Light wind but continued to be undecided...

Check with Sinclair/Brownells Carbide--$50.00 Steel--$10.00 Make sure you buy the cutting mandrel not the expander mandrel CLP

IBS shooter of 2018--600 yard Bart Sauter Earns top honors Maybe someone can furnish more details This info is from another site Congratulations Bart CLP

Pma PMA has attached stable feet for a Farley and Seb rests. Really work well CLP

Jack You might get some offers from those who own a Nielson neck turner if you would agree to turn case necks for them!!!!!! CLP

Thanks Mark Just what I was looking for!! CLP

What neck diameter bushing is used for re-sizing case 0.268 necks? Do you change bushings for powders (ie: LT-32/N133)? Do you use a lighter grip on the bullet than when shooting 0.262 necks? Thanks for replies. CLP

Scopes 36--50 power fixed is the majority. Don't see any off set rings--maybe I'm just not looking close enough??? CLP