Search results

Congratulations Butch! Not bad for an older barrel! John VM

Yes, if the patches are coming out dirty then your barrel is not clean.

congratulations Harley on winning the 4 gun! Congratulations Buddy on being shooter of the year!

If it needs a handle installed Dans40x has been highly recommended. This is probably the least understood area of gunsmithing as it involves camming for extraction as well as cocking the bolt so it does not interfere with the sear trigger engagement when closed. If this is about headspacing the...

Steve, it was good to see you at Western Wayne! It was about as nasty as I have seen it in a while but still a great place to shoot. You did ok for the first time there.

Congratulations to Jack on the 2 gun! Also to Jerry on his 2nd place finish in the heavy 200! Congratulations also to Don on his light varmint 100 win and to Larry on the light varmint grand agg!

Congratulations Joel!! Champion of the World Shoot for the second time in a row!!

3 of Benchrest's legends. It is a great video! Stan always has a smile or a joke for everyone. One of the greats in this sport for sure.

Congratulations Tim!

Al, I see a bunch of empty cases. How did it shoot? I like with or without the tape. lol

Congratulations Joel!

Have a look through it at something 50 yards away with the parralax set and see if you can see the target clear and sharp, I have one and am happy with it so far.. John

Congratulations Lacy! Way to hang in there and get it done! John VM

Thanks Tim, Congratulations Paul and Lee. Great job in challenging conditions! John

Congratulations Larry, Brian and Tim! Brian, you should save them barrels for the world shoot later!

Pete, I know in a 6ppc a #3 is smaller than a #2 by approx. .001. Measure your cases after being fired and then after sizing to be sure.If it is sizing a tiny bit and it reduces the click a little bit with a #2 die, a 2.5 die might be perfect but if it is not reducing your shoulder diameter...

Congratulations Kevin! John VM

Stephan, you are correct. The click is not really a deterrent to accuracy but more the speed we can reload and get back on target without changing the way the rifle tracks or reacts in the bags by excess moving around. If you like to shoot quickly in a certain wind condition before it changes...

Hi Stephan, That should work ok. The shoulder bump sounds perfect. If you are not getting "the click" at the top of your bolt lift then you are good with what you have.

Hi Stephan, If the brass is sizing the dia of the shoulder to .001" smaller in diameter than the fired size and at .200 above the base it is about .001 thou smaller in diameter than fired size, then adjust your die to set the shoulder back until the brass has almost no resistance closing (feel a...