Search results

Hi Butch, I got the tension screws today, Do I screw them in until they make contact individually then adjust tension on each side? or is there a different way to install them. Thanks, Ron Tilley

do you then cool with water or leave um to room temps to cool? Thanks, Ron Tilley

I shot this set-up today at the Folsom club, used it for light gun, it did good! I am gonna tweak it some more, but it shot a small group and placed in the top 3 of all the lg aggs and single targets today. It took more elevation to get there than I had calculated, I think that I can...

like a hobo on a hotdog, I'm on it!!!!!!

Not sure I understand, but if your stock is fabricated, get a straight edge and make sure the add-ons are straight. Look at your stock sliding in the bags, can you tell if it slides more from the rear or more from the front? I think this can be easy to track down. Good luck, I...

maybe thinking before punching keys on the keyboard will help you in the confrontation arena here. Have you seen the inside of Franks barrels? He offered a opinion and has to contend with your post afterwards. I do almost exactly what he described in his post and I would be willing to bet...

to be honest, we need to know more about your build? if its a hunting rifle that you shoot once a year and only need to hit the x on the paper a few times then buy the cheapest you can, if it goes any deeper than that post it to us and I am sure you will get all of the help you will need...

I wonder?? our prices went up .14 cents overnight last night. $1.64 yesterday, $1.78 today! Holiday travelers????? Ron Tilley

are you handloading? if not start there IMHO. If you are, maybe start with trigger re-working and bedding. From there if you are not satisfied, do the action work and replace the barrel together. Of course above is just my opinion. Ron Tilley (this would gain...

Sorry to bring this up again, but a few questions asked by the girl at PT&G made me come back for more information. I am purchasing a oversized bolt from PT&G it will be .703 with a magnum b-f. The action will be reamed out to .705, the questions that I have were 1). I was asked what...

Tod, I will pm you, if interested and I am willing to help out, gladly! Ron Tilley

Tod, my reamer is a .301 nk, I can send you my reamer sheet (I think). If you want it let me know, I see 6.5 fan has replied, he is probably the most experienced person I can think of in relation to this case. Ron Tilley

Tod, I am pretty sure that Redding lists custom dies for the 6.5wssm, I use the .25wssm bushing die and a body die of the same, and have a seater that I bought off the net that was cut in a Newlon blank, you can have a Redding seater opened up and the seater plug changed alot cheaper. I...

6.5fan Martin????? promotes that case alot and has had great success, Boyd Heaton, and a number of others, a great round, VERY THICK necks, you need to turn alot and anneal if possible, I think that is the big secret to help with that case. let me know if you want more information...

my bad, both headings were on neck clearance so I thought it was the same project. Ron

John, Charles E, explained in great detail what I attempted to do on the other site. The pressure ring really comes into play with that tight of clearances, tho I am unsure if those bullets have such a pressure ring. good luck! Ron Tilley

Redding dies available for this now, on the seater, I think you have to open up the stem to accomadate the seater plug. the bushing die will work universally by changing out the bushings. body die included in set. Ron Tilley

Tod, research the 6.5 wssm, quite a few of them around, I have a couple variants, 6.5fan shoots one very successfully, Boyd Heaton, there are more, just not off the top of my head right now, its based off the .243wssm or the .25wssm hope it helps, Ron Tilley

I posted this same question on the cf board by mistake, but I am looking for a outlet that sells the modified calipers (12") for measuring groups, a clear plastic piece fixed to them with the different bullet sizes etched and a brass spring loaded punch to hold the calipers in place on the...

I am wondering where I can buy the calipers that have been modified to measure groups? 12" would be great, the ones that I have seen had a clear plastic piece fixed to it with different bullet sizes to start from and a brass center punch (spring loaded) to hold the calipers in place...