Search results

Mike, I do not know how far from Bayfield you are, I have a gunsmith there that does top end work, if I can help pm me and I will send his contact information. Ron Tilley

I just looked at my reamer print, it has .200 freebore. I just bought a couple hundred of the Nosler brass and checked the n/d it ran from .0120 to .01230 the neck diameter for mine in my chamber is .292, if a person turns all the brass to .0120 it gives a .288 loaded round, that...

I agree completely! Its a huge improvement, thanks to the people who have taken the time for improving it. Ron Tilley

Ray, I agree, I compete at a local club (non sanctioned) and NBRSA registered matches that are available, most competitors at our club level will not compete at a registered match because they feel they are not competitive enough or thier equipment lacks in one form or another (mostly...

put it together and heat it up!!!!!!

I do not know, but where I would start is making sure of the fit of the metal to the stock. make sure its bedded properly, no stress of the action fitting in the stock, no barrel pressure in the barrel channel, and make certain the scope is a repeatable scope that is secured proper...

your making it way too hard to help. A little more information from you is needed, what rifle,brass, and so on, what has the rifle printed, and what is it telling you? how are you cleaning it? is it clean? its a stab in the dark with out more from you. Ron Tilley

looks like a mastiff, red fawn, the bullmastiff's do not get as big as a english mastiff, I have had a few of them, got one right now, brindle in color, my first got up to 170 pounds, the one I have now is at 125, that photo was around a year ago or so, and there were some more with...

Sloughhouse Shooters Match 1 NBRSA 1,000 Yards 1-25-09 Lightgun 3 Tgt Score Agg 3rd Stu Harvey 133-3X 2nd Ken Schroeder 136-1X 1st Greg Wilson 140-1X Lightgun 3 Tgt Group Agg 3rd Ken Schroeder 8.064 2nd Gary Gaglano 8.059 1st Greg Wilson 7.858 Heavygun 3 Tgt Score Agg 3rd Steve...

It can't hurt to look out for them, I did not and it bit me in the a$$

Brian, it was no schooling, just a shooter helping a fellow shooter, something we all should do to keep the sport alive and growing, I enjoyed the day, sorry for being pushed for time, but we got alot done and you should benifit from it. Ron

Al, thank you, for posting pics for me, I am not sure if anyone can see but on the factory .243 brassin the final picture, the neck/shoulder junction is very sharp, almost kinked. I expanded it up to 7mm then started neck sizing back down to .6.5, the junction stayed, the neck...

I think the culprit here is the shoulder/neck junction. it is so sharp of a junction that it is kinked, and hard to iron out. I think that I have a handle on it now, I just got done prepping 100 rounds of new brass and it seems to be worked out. Thanks, Ron Tilley

Al, I read your post on another thread on doughnuts, my problem is not from setting the neck back too far, I measure my fired cases and set the shoulder back 1 1/2 thou. I do not think the doughnuts would come from that would it? Thanks, Ron

maybe I need a lesson! I got um. Its only on the .260 improved, and only with the .243 Lapua brass. I have had no problems other than this. Don, do you have a suggestion? can you tell me what I may be doing wrong? I run the cutter down till it just starts to cut the shoulder...

surely this has been smothered before, but I am wondering about reaming inside necks on my 6.5, what is the process? what is the best tool? where do I sign up? I have the dreaded doughnuts in my Lapua brass and the bottom of the bearing surface of my bullets is seating into it on some...

congrats to all of you! Ron Tilley

Al, good shooting to you and the rest of the guys up there! not sure if its what you are asking, but I always center up on the target, take plenty of sighters, and pick my condition, but always hold in the center unless I am running out of time and think I know what the condition...

Bartlein gets my vote! I have a few Rock Creek barrels that are great as well. Ron Tilley

Scotty, I am interested, how big of a case will fit? if a .308 sized case will fit, I would take one if you still have any? What is the price also? Thanks, Ron Tilley