Search results

I've read tons of stuff on bullet making. One thing I think has changed is core seating pressure. Most of the stuff I've read from years ago was to seat the core till the jacket was on the verge of popping or until it popped then back off a little Another is bleed by. Seems like all the older...

Way to go, Jeff !! Keep the pressure on em.

It would be great to see George and or Randy write up an article on bullets making. I think the way of doing things has changed some since the articles back in the PS magazine

Wonder if the reason some shoot better with 750 jackets is they like the twist better

I think it's all of the things in this entire thread coming together. With just plain old experience being the common denominator The CTF guys didn't just appear overnight most have 20 plus years of hard fought competition experience under their belt. Well deserved success

I think their bullets have a lot to do with it

Maybe this next barrel will cure what's ailing me:D

Sorry, 100-200 I should clarify to say if the tune you had working the day before is just gone on the first target and won't hold up to the hard push. I know something has to change. I will go up in powder and can get some help but I don't change seating depth. I'm just wondering if that is...

Thanks, Tommy

Glad the injections are helping I'm talking about after you've done all you can with tuning. Then on match day like it so often does goes to H in a hand basket. In strong wind if your tune is off the lands would your first change to be go into the lands if what you have aint cutting it

Ya all have me worried Wasn't he at super shoot?

Did you have another surgery on back? Took 3 before mine finally got to where I'm good til on up in the afternoon then it bothers me some

Question on tuning seating depth Say you have tuned your gun to the best seating depth prior to a match and this is .015 or so back from jam Then on march day there is a significantly bigger push hard wind than on practice Do a lot of you, right away go deeper into the lands with seating depth ?

Great job, Jeff Happy for you!

Good news! Thanks for the update

Bill A request. To go along with your great match report write ups. Could you start posting a PDF of the whole match?

Hate I missed it. Sounds like Greg had his stuff working. Hope Charlie is ok Keeps us posted on him if you can

Awesome display !!!!

The problem with neck turning that small for a guy just starting out like me. I didn't do a very good job of it. Neck tension all over the place. Ended up buying them turned Going with a 268 or a 269 they can be turned in one cut bad a much better job can be done by a new guy with one tool no...

Tommy I'm not sure you can be entrusted with anymore of this powder