Search results

unertl If you can find an old Unertl it will be amazing if you put it beside the others and compare it. They are the best in my opinion.

Have you considered a Martini? I have a couple of Martini's, a Mark 111 and and International that will outshoot any Winchester 52 I ever had and I have had 4. It also shot better than a Anschutz 64 that I used to have. They are pretty good guns and available most of the time.

Has anyone really benefited from one of these? Hornady Lock-N-Load Overall Length Gage. Are they really worth the extra effort?

Can someone tell me the best or easiest way to remove a barreled action from the stock without damaging the stock? Thanks Bill

Does anyone here have one of the new 21st century neck turning lathe's and if you do how do you like it [rate it]?

Yes and it is shortened and necked down.

Does anyone on this site have a 7mm km? I am looking for some brass without having to make it. Let me know what you have. Thanks Bill

email sent.

Martini Mark iv base FOUND ONE Looking for a base to mount a Redfield Olympic rear sight on. The base is flat with mounting holes 1 1/2 inch on center. I hope someone has one they want to get rid of. Thanks Bill

Does anyone make a drop in stock that will fit a Nesika J action? The one I have I am not too happy with and would like to have a different one.

lead bullets It has been scientifically proven that lead ammunition will only harm you if you are shot with it. It came out of the ground and if it goes back in the ground that is natural. This is all a hoax perpetrated by the politicians [communists] in California.

Has anyone used one of these scopes yet? Would like to hear some opinions on how good or bad it is.

imperial wax Imperial wax should be sufficient for any standard reloading resizing. If you are FORMING brass lanolin mixed with castor oil works better than anything I have ever used and I form brass for about 15 wildcats.

unertl Sold the one I had on ebay for 550.00. If that helps any.

I remember years ago when S&W bowed to Clinton and my attitude toward them changed forever. I have not bought a gun from S&W since. I will remember Dick's sporting goods and I will deal with them the same way from now on. The Constitution says exactly what it means and America will follow it. I...

Most likely excessive headspace is what caused the problem. Used to have that problem shooting 7/223. You need to load a bullet to touch the lands and force the case into chamber and fire it and that should prevent any more problems.

Maybe someone here can answer this question. Is the 40 X Remington action footprint the same as a standard Remington short action? I would think it would be the same but I am not sure. Thanks Bill

The problem I had with my Dillon is operating it on the battery. I got it so I could do away with all the wires and it would constantly need to reset the zero. I ran out of batteries and switched to the electric wire and it hold a zero almost all the time. I don't use it with the battery...

Well looks like no major problem with the brass. I finally got a load that shoots good and the last group I shot measured .217. So I pretty much have solved the problem. This was not a used rifle and was not sure if it needed to have the necks outside trimmed or not. The group I just shot was...

The Japanese folded the steel again and again, Damascus barrels they wrapped a piece of steel around a rod side by side and welded it, polished and blued the outside and left small areas that could rust. A totally different process from sword making by the Japanese.