Recent content by Fuj

It's pretty arbitrary to the discipline. Guy's I talk to that shoot short porch BR, and jam bullets will keep a tighter neck clearance. My .030" free bore rifle, I ream for .001" per side......The LR rifles with .190" to .240" tight free bores, my reamers are .015" per side on a no turn neck...

No problem on my end.......

According to that article, the shoulder then would have remained at 23 degrees. Good stuff from back in the day......

Sometime back I was given a few cases to look over and one was the magnum case that was pushed straight back to 40 degrees leaving a long neck. Never found out what it was called or who formed it. This maybe ?? I have no clue. The other was a .223 mil case pushed to 40 degrees. This all was...

Bottom line.....Keep life simple. torque em' to spec and move on to the more important things. The only one I'll mention specifically if it's a Savage, after the screws are tight, check to see if you can slide a dollar bill under the tang. They like that little bit of clearance.......I still...

What is the actual rifle you are working with ?? In most cases if not all, I'll tell you to set them to factory spec. Are you shooting factory ammo or hand loading ??

I see the clown I responded to got whacked......Give the boss an X-ring !!

Contacted the boss this morning and he got back to me to weed this particular clown out. Can't say he or she but "It's" gone......

Target Shooting .com might have something but won't be cheap. One of the guy's I know used an old Bald Eagle top to make one. He narrowed it up quite a bit including the windage knob. It sits in a thick steel block. probably weighs 20 lbs ?? Shoots a 30WSM off of it on a Williamsport heavy gun.

i see you posted just to get your spam thru. Your posted statement on cleaning brass would only be effective if you also cleaned and polished your chamber at each firing also......As for me......leave the carbon in the neck, and remove any on the outside prior to annealing. After annealing, I...

Started back with the attack on NY, and the beginnings of Homeland Security. Here in Erie Pa, we had bus loads of Canadians coming to shop, skipping NY. No tax's on clothes, and way cheaper in overall pricing at our large area of shopping centers.......Crossing the border became a bit of a...

From back in those day's I would like to know what barrel maker was the preference. In my neck of the woods most used Douglas or Hart, and if lucky to get one, Obermyer. My Uncles .222 used a barrel from Boots.

Let's see......Zuckerboig steals the platform from two other students that developed it. He is sued but wins, when lawyers figure out what he can be worth. He becomes a billionaire in no time by stealing (alledged) and trading personal data. Government looks into it (loosely) and is told to...

I'll have the guy's at EuroOptics do it. I'm heading over there possibly this week to dump my March High Master X. Going to trade it for another NF Comp but, I may just lean towards that Sightron with the 60mm objective. The 5x less magnification will not bother me with my eyes.

Always been intriqued by that 60 mm Objective on the Sightron. I'd only wish they would increase the power range like they did on the 56mm field scope. They went to 60x on that one. It would cut into the NF Comps large market share by a huge margin.