Who has barrels??

[TomD]

Trying to find a Bartline or Krieger, 30 cal. 17 twist, HV taper. Anyone know who might have something like that?

Been out of competition for a few years and everything has gotten scarce and expensive.

Thanks in advance.

 

[Dave Rabin]

Tom,

Bruno's has Kriegers in stock, both 17 and 18 twist. See http://www.brunoshooters.com/mm5/me...&Store_Code=BSS&CatListingOffset=60&Offset=60


Dave

 

[abintx]

Trying to find a Bartline or Krieger, 30 cal. 17 twist, HV taper. Anyone know who might have something like that?

Been out of competition for a few years and everything has gotten scarce and expensive.

Thanks in advance.

It's always expensive. This is not an inexpensive sport.

Try: http://www.brunoshooters.com/category/barrels.html

Or: http://www.benchrest.com/hoehn/html/shilen_barrels.html

 

[JerrySharrett]

Also try www.bugholes.com

 

[afrench]

here ya go. in stock and ready to go.

Butch's Reloading
owned by Butch Fjoser and run by Ed Adams. both are Benchrest shooters.

http://www.butchsreloading.com/shop/build-components/890-bartlein-barrel-308-110-twist5r-no12-contour-hvpalma-31-.html

 

[TomD]

Thanks, Guys!!

 

[Dusty Stevens]

Kelblys usually holds some in stock too. Call Ian

 

[JML]

Trying to find a Bartline or Krieger, 30 cal. 17 twist, HV taper. Anyone know who might have something like that?

Been out of competition for a few years and everything has gotten scarce and expensive.

Thanks in advance.

I have one in stock. It's not a Bartlein or a Krieger, but it is cut rifled.

 

[BHB]

Try Savageguy on accurateshooter.com.

 

[jim1K]

+ 1 on the Savage guy i think he did have 5-6 Kriegers…….. jim

 

[TomD]

Ended up with a HV taper Bartline, 17 T, that is due for delivery to a certain very Humble gunsmith today for a chambering with his new minimum-neck-turn reamer. He's incorporated another unusual element to this reamer. Instead of the usual BR 1.55 max length and 1.50 trim to length, it's a 1.520 on the theory of why knock all that neck off a round that thrives on neck tension.

 

[JerrySharrett]

Ended up with a HV taper Bartline, 17 T, that is due for delivery to a certain very Humble gunsmith today for a chambering with his new minimum-neck-turn reamer. He's incorporated another unusual element to this reamer. Instead of the usual BR 1.55 max length and 1.50 trim to length, it's a 1.520 on the theory of why knock all that neck off a round that thrives on neck tension.

Humble Henry, eh? Or EH as Gammon would have put it!!