Speedokote Clearcoat Experience ???

R

Ricco1949

Member
Does anyone have any experience with the Speedokote clear coat line of products for use on walnut and laminate gunstocks?

If yes which product did you use and what speed activator.

Thank you in advance.

Rick
 
IT's GOOD

Have used Acrylic Urethane as a clear coat over Acrylic Urethane paint on a stock. Drys fast so you can do multiple coats quickly. It is tough and resists solvents. Use proper respitory Protection when spraying.
 
Engrbill said:
Have used Acrylic Urethane as a clear coat over Acrylic Urethane paint on a stock. Drys fast so you can do multiple coats quickly. It is tough and resists solvents. Use proper respitory Protection when spraying.
Click to expand...

Engrbill:

Thank you for your reply. Can you give me any advice on the activator speed to use?

Rick
 
Last edited:
Speed

Ricco1949 said:
Engrbill:

Thank you for your reply. Can you give me any advice on the activator speed to use?

Rick
Click to expand...

When I used it there was only one activator and it was pretty fast. I could do three coats with15 minutes in between coats. The stock was mounted upside down on a base withlong allthread risers thru the bolt holes so it could be quickly rotated to cover all areas in one contiuous spray. Good Luck -----Bill
 
Engrbill said:
When I used it there was only one activator and it was pretty fast. I could do three coats with15 minutes in between coats. The stock was mounted upside down on a base withlong allthread risers thru the bolt holes so it could be quickly rotated to cover all areas in one contiuous spray. Good Luck -----Bill
Click to expand...

Thank you Bill. I'll order some with the medium activator.
 
You must log in or register to reply here.
Back
Top