Remington 40X Dimensions

B

BAJ

Guest
Can someone give me some of the dimensions of the Remington 40X action. I would like to know the hole spacing for the action screws, diameter of the action, location of the loading port, thread pitch of the barrel and anything else you can measure for me.

Thanks
Brian
 
Brian, coincedence, I was just measuring my 40X receiver for a project. From the front of the receiver to the breech opening is 1.6" and the opening is 2.4". The receiver diameter is 1.355" and just eyeball because my caliper don't open big enough, action screw hole spacing is ~ 6.5". I recall seeing the "official" dimensions somewhere, maybe on Rimfire Central, there's some real Remington affectionates over there. Thanks, Douglas
 
sorry it took so long to get back, I guess I'm way too busy, or way too lazy. As best as I can measure, from the front action screw to the middle, c to c, it's 3.749" and from the center screw to the rear screw it's 2.772". I remember a long time ago I saw a shop drawing that had all the dimensions, the drawing was two views. I asken over on rimfire Central, didn't gat an answer. i'd like to get my hands on that drawing. thanks, douglas

PS; my shift key don't work too good.
 
You must log in or register to reply here.
Back
Top