Powder Names

[jdjframes]

Is there a table/chart which shows which powders are the same with just different names from different companies?

I'm not talking about burn rate, there are burn rate charts everywhere (almost).

I've heard H-110 is the same as Winchester 296, H-414 is the same as Winchester 748, and several more.

It might be nice to know when A = B or X = Y, and when A does not = A.

Thanks.

Jim

 

[Chisolm]

H-414 is the same as Winchester 748.

Thanks.

Jim

That is incorrect. H414 is the same powder as Win 760.

James

 

[Bill Ohio]

Is there a table/chart which shows which powders are the same with just different names from different companies?

And how about such a chart for box spring mattresses?

 

[Joe S]

Hodgdon used to list all their powders and their aliases in the MDSD pg but only show limited powders anymore. These are a few of them

HP38/W231

HS6/W540

HS7/W571

H110/W296

H414/W760

Smokeless (Hodgdon)
Clays Family Powders


Clays (AS30N)


Universal (AP70N)


International (AS50N)


Extruded Rifle Powders


H4227® (AR2205)


H4895 (AR2206H)


H4198 (AR2207)


Varget (AR2208)


H4350 (AR2209)


H50BMG (AR2218)


H4831 (AR2213)


H4831SC (AR2213SC)


H1000 (AR2217)


Retumbo (AR2225)


H322 (AR2210)


Benchmark (BM2)

 

[jdjframes]

Thanks Joe S.

Thought there would be something like that somewhere.

Lest someone thinks I'm new at this game, I reloaded my first 30/06 round in about 1964 with a Lee loader in a dorm room at a college which shall remain unnamed.

Jim

 

[RHM43]

powder= powder

try this......
http://www.adi-limited.com/handloaders-guide/prnEquivalents.asp

 

[Joe S]

try this......
http://www.adi-limited.com/handloaders-guide/prnEquivalents.asp

RHM43 be aware the powders in the chart you`ve linked to are "similar" but not the "same" powders.
The powders I`ve listed are the same powders except for name and any differences are due only to "lot" variation. There was another slightly expanded chart listing "same" powders out there somewhere at one time, but where I can`t recall.

 

[Joe Duke]

Thanks Joe S.

Thought there would be something like that somewhere.

Lest someone thinks I'm new at this game, I reloaded my first 30/06 round in about 1964 with a Lee loader in a dorm room at a college which shall remain unnamed.

Jim

Must have been close to the school where I was. Except it was a .22-250.

Joe