Inside neck lubing with MOLY

rsmithsr said:
it all depends.
If the bullet is at or in the ands less actual mechanical neck tension is required. A slow burning powder in a case limited by mag length may benefit from a bunch of tension.
Best to try various amounts in each case.

And yes it is being used on loaded ammo.
Click to expand...
use graphite for lub when neck turning
 
remy said:
hi guys would like to ask how to prepare the moly or which moly type is used to lube inside case neck ?
The method im after is the one ive seen in video by lou murdica in which he dips a brush in a solution, not sure if dry or wet and proceeds to lube inside case neck , if wet would like to ask how to prepare and which solvent is used to do this ?

Thanks to amo reply in advance,

cheers remy
Click to expand...
inside neck with q tip light
 
remy said:
hi guys would like to ask how to prepare the moly or which moly type is used to lube inside case neck ?
The method im after is the one ive seen in video by lou murdica in which he dips a brush in a solution, not sure if dry or wet and proceeds to lube inside case neck , if wet would like to ask how to prepare and which solvent is used to do this ?

Thanks to amo reply in advance,

cheers remy
Click to expand...
get a plastic cap deep to have graphite in and dip cases in it will lube inside used since 1973.
 
BillBrawand said:
been using graphite since 1973 works fine.
Click to expand...

Motor Mica has worked for me in live varmint rifles.
Panda actions, Jewel BR triggers.
Right bolt, left port.
18x-40x scopes.
Leupold Scope with a power doubler.
Before Precision Reticles died.

They start life as .22-250 AI and 6mm REM AI.
Both 30 inches long.
I generally stop using them after they have been set back five or six times.
 
You must log in or register to reply here.
Back
Top