J
jazzy
Guest
bump .... would like to here more on this one.
here's one for you
Boeing makes one you'll like: http://www.af.mil/news/story.asp?id=123154924
With this baby, you won't have to worry about competitive benchrest shooters whining about their eyesight, they'll just vaporize if they walk in front of your bench....
Boeing makes one you'll like: http://www.af.mil/news/story.asp?id=123154924
With this baby, you won't have to worry about competitive benchrest shooters whining about their eyesight, they'll just vaporize if they walk in front of your bench....
Woody almost.
Quote: During the test, the specially modified 46th Test Wing NC-130H aircraft equipped with the ATL weapon system took off from Kirtland and fired its laser while flying over White Sands Missile Range, N.M., successfully hitting a target board located on the ground. ATL is equipped with a chemical laser, a beam control system, sensors and weapon-system consoles.
I work with 8K CO2 lasers. For sheet metal welding. Cars mostly.
It will burn your fingers like a hot dog. No eye injuries.
"I will burn you to the ground". Not even close. That was from Star Trek. A Capt. someone????
That NC-130H, would need, a 480VAC 200 amp continuous power supply.
Quote: During the test, the specially modified 46th Test Wing NC-130H aircraft equipped with the ATL weapon system took off from Kirtland and fired its laser while flying over White Sands Missile Range, N.M., successfully hitting a target board located on the ground. ATL is equipped with a chemical laser, a beam control system, sensors and weapon-system consoles.
I work with 8K CO2 lasers. For sheet metal welding. Cars mostly.
It will burn your fingers like a hot dog. No eye injuries.
"I will burn you to the ground". Not even close. That was from Star Trek. A Capt. someone????
That NC-130H, would need, a 480VAC 200 amp continuous power supply.
J
jazzy
Guest
J
jazzy
Guest
J
jazzy
Guest
Yes they are just set up for demo. I also tried a piece of white coroplast and it seems the green dot shows up on it much better. So I may have to make a white coroplast bonnet for the top while setting them out.