Ken Livengood
New member
Does anybody know the freebore needed on a 223 reamer with a 1 1/2 degree lead, this is for 69 gr sierra hpbt match bullets, I need it to be in the lands @ magazine length 2.260.
The group I am doing these barrels for is very fussy and it has to be right. I know I could get a throater, but I would sooner do everything with the reamer.
Also what neck diameter would be good for Lapua brass, no neck turn.
Any help would be apprieciated.
Ken Livengood
The group I am doing these barrels for is very fussy and it has to be right. I know I could get a throater, but I would sooner do everything with the reamer.
Also what neck diameter would be good for Lapua brass, no neck turn.
Any help would be apprieciated.
Ken Livengood