Check The News

R

reamers4u

Guest
New Sources For Re-Loading Dies

I have noticed the custom reloading dies are very hard to get lately and most of the time the people that do stock them charge a lot more than the factory price (an arm and leg). I always support the factories and send people to Hornady, Redding Reloading, Forster and L.E. Wilson for dies. Today I have talked with John Whidden and he has pledged to manufacture and stock hard to find reloading dies and case Gauges and also he will supply 10pc .001 Incremental Gauge sets to set up proper case Gauges. Please let John know what you need him to stock. Here is a list of a few for him to start stocking:
22,6mm BDRX
22,6MM BRX
6.5X47 LAPUA
22,6MMX284 LAPUA
22, 6MM PPC, BOYER, PURE MAGIC
22,6MM DASHER
6.5 CREEDMOORE
6.5 SLR/BOLT
6MM SLR
6MM BR
264 LBC-AR
6MM LBC-AR
6MM LBC-AR 40°
30 BR
300 AAC Blackout
ALL ROGUE SPECIALS (the perfect turbulence point 37°)
AND CASE GAUGES FOR ALL THE ABOVE!
If you would like to make your own reload dies, Dave Kiff said he would offer a special deal of a solid pilot full length die reamer and a knurled and threaded die blank with caliber specific thru hole for $107.50. This would be a great deal for the folks that would like to make their own dies without selling the farm to do so.
John Whidden Of Whidden Gun Works- 229-686-1911
Redding -607-753-3331
Dan @ L.E Wilson-509-782-1328
Bob- At Bob Greens-717-792-1069
Wayne Campbell-434-665-2066
Jim at JLC Precision-563-689-6258
Trevor Rosencranes-307-568-3009
All of these gentleman & Companies are more than willing to assist you in any of your Reloading Needs For the Reamer & Die Specials please call “The Bomber Girl” Megun Lawrence At Pacific Tool & Gauge.
1- 541-826-8508.

Megun - “The Bomber Girl”
 
Last edited by a moderator:
As best I can tell, this is "news" brought to us by Pacific Tool & Gauge (who does advertise on BR Central).

It really is "news" because PT&G has been backed up a bit of late and people need stuff. One of the odd things about BRC is we don't generally allow ads in the forums, or label someone a "sponsor" if they simply advertise on the site. You can be a "sponsor" at a large match & mention it here (and PT&G has been such a sponsor).

Thanks for both the information and for helping to keep us as commercial free as possible.
 
reamers4u said:
.......If you would like to make your own reload dies, Dave Kiff said he would offer a special deal of a solid pilot full length die reamer and a knurled and threaded die blank with caliber specific thru hole for $107.50.





“The Bomber Girl” Megun Lawrence At Pacific Tool & Gauge.
1- 541-826-8508.
Click to expand...

you can't be serious.....

A REAMER and a DIE BLANK both for a hunnerd-N-seven dollars an' fitty cent???

please confirm this Megun, I don't care HOW far out ya's are.....

al
 
Has anyone checked on this? I've been thinking about a sizing die reamer anyhow so this would be a pretty smokin deal!!
 
You must log in or register to reply here.
Back
Top