Brought home a Heavy 10

[BillBrawand]

have designed new ejection bullet knock out got rid of all threaded rod and steel olders slick more room to fed jackets. 1 814 335 0450 c bill brawand.

less weight on handel keeps arm from getig tired.

 

[MilGunsmith]

Everything you need to know about South Bend Lathes

The SBL Workshop http://wswells.com/

 

[Butch Lambert]

Apparently there's a third spindle, with a 1.375 bore and a sb taper that has to have an adapter to use 5c collects. I have that one.?

Mike I learned something on the vee ways. I think most or maybe all lathes need an adopter to handle the 5C collets.

 

[mwezell]

Mike I learned something on the vee ways. I think most or maybe all lathes need an adopter to handle the 5C collets.

I agree. This was never meant to be a contest. I'm just giddy at the run out on the indicator! That's old school American quality, right there.

 

[BillBrawand]

less weight on handel keeps arm from getig tired.

at present time burning 7.5 and 8 ojive dies all dies tested before leaves shop in 6mm 1 814 335 0450 c.

 

[BillBrawand]

less weight on handel keeps arm from getig tired.

new ejection frames for r c b s rockhufkers presses.