You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Best places to order Devcon 10110?
- Thread starter p5200
- Start date
D
Donald
Guest
Why not just use J-B Weld. You can find it about anywhere. I get the large tubes at a local auto parts store. Works fine. About half the price too.
Donald
Donald
T
tenring
Guest
Brownells has it, but at $36 and I doubt they ship free.
http://www.brownells.com/.aspx/pid=5808/Product/EPOXY_METALS
http://www.brownells.com/.aspx/pid=5808/Product/EPOXY_METALS
ENCO has a slightly lower price than Brownells or MSC
http://www.use-enco.com/CGI/INSRIT?PMAKA=505-2708&PMPXNO=947828&PARTPG=INLMK32
http://www.use-enco.com/CGI/INSRIT?PMAKA=505-2708&PMPXNO=947828&PARTPG=INLMK32
S
Signguy
Guest
Grainger
S
spencer313
Guest
McMaster-Carr.
J
Jan
Guest
H
HansenCE
Guest
Just as a suggestion try Devcon HVAC instead. It's basicly the same stuff except the filler material is aluminum not steel. The steel material can potentially rust. It was a tip that was passed on to me by someone I consider to be a master stock maker and now I can pass it on to you. Hope this helps.
Carl
Carl
C
carlsbad
Guest
Devcon Al puddy vs steel puddy
Interesting to find this post. I've been looking for a good price on Devcon 10110 and waiting until I needed some other tooling so I could combine shipping. Now I need to do a a repair on an AR15 lower so I need some Aluminum Putty, 10610. So I pulled the spec sheets and they are very close but the Al doesn't rust. strength and shrinkage aren't significantly differnt. I like the darker color of the steel but oh well. The Aluminum is lighter. Aluminum is more expensive. but I'm going to order some and give it a try.
--jerry
Just as a suggestion try Devcon HVAC instead. It's basicly the same stuff except the filler material is aluminum not steel. The steel material can potentially rust. It was a tip that was passed on to me by someone I consider to be a master stock maker and now I can pass it on to you. Hope this helps.
Carl
Interesting to find this post. I've been looking for a good price on Devcon 10110 and waiting until I needed some other tooling so I could combine shipping. Now I need to do a a repair on an AR15 lower so I need some Aluminum Putty, 10610. So I pulled the spec sheets and they are very close but the Al doesn't rust. strength and shrinkage aren't significantly differnt. I like the darker color of the steel but oh well. The Aluminum is lighter. Aluminum is more expensive. but I'm going to order some and give it a try.
--jerry
Interesting to find this post. I've been looking for a good price on Devcon 10110 and waiting until I needed some other tooling so I could combine shipping. Now I need to do a a repair on an AR15 lower so I need some Aluminum Putty, 10610. So I pulled the spec sheets and they are very close but the Al doesn't rust. strength and shrinkage aren't significantly differnt. I like the darker color of the steel but oh well. The Aluminum is lighter. Aluminum is more expensive. but I'm going to order some and give it a try.
--jerry
another thing to keep in consideration is thermal expansion