6mm222

[Donald]

There is also a 6mm VarTarg Turbo which is based on a 222 with a 30degree shoulder.
http://www.woodchuckden.com/VarTarg.aspx

But I can find no load data about the 6mm version.

Ray,
For some reasons, unclear, Steves Pages is no longer. Kaput. Gone. Anyway, I just got to thinking about how a 6x43 might perform as compared to a 6ppc or a 6Beggs. I have liked the Duce for some time but never had one. And don't want to have to keep track of 224 and 6mm bullets. Thanks everyone for thier help, maybe I'll stumble on to some loading data somewhere.

Donald

 

[Cheechako]

I think this is a link to Steves Pages for the 6-222. If it doesn't work you could always interpolate from loads for the 6x45 or the 6x47.

Ray
http://stevespages.com/243_8_60.html

 

[Jim S]

I have a ptg 6mmx222 reamer, let me know when you need it.

 

[Donald]

Thanks Jim,
I found some data on Hodgden's site. For what I was looking for the 222 just doesn't have quite enough boiler room. May have to look at the 6mmBeggs.