22 BR and Vitha powder

V

Viper65fr

Guest
Hello every one,

I am new on this forum and would need the help of those of you who have an experience relaoding the 22 BR.....
 
I find that the most accurate load I have for the .22 BR uses Reloader 10X or H322. I use the Sierra 52 grain Matchking bullet and CCI BR4 primers.
 
Viper65fr: I have a pair of Remington 40X-BR Rifles in caliber 22 Remington Bench Rest.
One 40X prefers W 748 powder and the other 40X prefers H 322!
I use Federal 205 M (match) primers in both Rifles.
Best of luck with your 22 Remington Bench Rest Rifle!
Hold into the wind
VarmintGuy
 
Viper, I would use either VV N-135 or N-140. I think I read several years ago that N-135 was about ideal. I have a couple of 22 BR rifles for varmint hunting, but haven't worked with them for 8-10 years, so don't remember the loads. Good luck.
 
If you want amazing velocities on light bullets <75g, use AA2520. It will beat 220 Swift velocities by a couple of hundred fps.
 
I've used VV N135 and N140 in my .22 BR with good luck.
 
Hey Jerry, maybe that is why I have a jug of AA2520? Thanks for reminding me. Are any of the Alliant powders, like RE-15 maybe, a good fit in the 22BR?
 
plenty will work...

I have had a 22 BR since the 70's ....and as these guys have said.....with small bullets ...322-133-135-4895....big uns...(80gr etc.) 4350 and Rx-17...and Rx 15 is good from big to lil"....it is a very versitale cal....sorta like the 6mm BR!!! ....Roger
 
You must log in or register to reply here.
Back
Top