Steelhead1
G Vanlier
I would like to repurpose my Kodiak action to shoot 600/1000 yd matches. Is there anyone making a a 20 MOA rail that will adapt the existing scope rail on the Kodiak action?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
20 MOA Rails
- Thread starter Steelhead1
- Start date
Karl Hunstiger
Club Coordinator
Kelbly's has 20MOA rings
Steelhead1
G Vanlier
Thanks Karl I will Check those out.
Kelbly's has slide-on Picatinny rails for Dovetail rails in 20 MOA and slide-on dovetails for dovetail actions with 20 MOA in the rail. I have a couple of Panda's with the slide-on picatinny rails and they work great.
http://www.kelbly.com/rings.html
http://www.kelbly.com/rings.html
Last edited:
Steelhead1
G Vanlier
Thank you for the info WSnyder, I looked at those when the first poster mentioned Kelblys and I am going to call them and order after the holidays are over. It's really good to hear it works well. I was all ready to buy a new barrel and chamber it for 6X47 or 6.5X47 and realize that there's not much difference right now because the rifle is 30X47 so I am going to try that at 600 yds first.
I shoot BIB'S 134 and figure that should do well at 600yds.
I shoot BIB'S 134 and figure that should do well at 600yds.
You're welcome. I coupled my rails with Seekins rings for a solid but fairly light setup. http://www.seekinsprecision.com/index.php?option=com_content&view=article&id=3&Itemid=7 The Seekins rings are pretty nice in my opinion, the only drawback to them in the past is he has gotten deeply backordered on them. I don't know what the current situation is, but like a lot of good products they have been hard to get at times.