Search results

Benchrest Shooter Al was a dedicated benchrest shooter and a very nice man. Al, rest in peace. Mel Newransky

Prayer List Allie, you are on my prayer list to get well. A very fine gentleman. Mel Newransky

Holton improvements

Ezell pdt tuner Mike, thanks for your response with regard to the tuner specification. I normally give the tuner to the smith so he can cut the thread and fit it properly. Your tuner will require minor modifications to the barrel as the smith is cutting threads 1.25 inches long. He will have to...

Ezell tuner Mike, congrats with regard to the .875-32TPI type tuner. However, the other spec required for the tuner is the .900@1.00 inch behind the thread. Most LV center fire rifles have a taper and the approximate dimension behind the thread would be .970. Therefore, additional machining...

Book Of Rifle Accuracy I would suggest that you get a copy of the "Book of Rifle Accuracy" by Tony Boyer and it will help you to reload.

Lt 30 hot hot powder The LT 30 is a very hot powder and has to be carefully used in the 6PPC. Suggest one uses a chonograph and shoot a one load/bullet in increments at a time and watch for heavy bolt lifts. One would have to back the load down for heavy bolt lifts. Bart seems to have success...

Slip Neck Gene, currently shooting a BAT DS with a .262 neck and turning brass to ,0081. I could turn the brass to .0085 for the first pass and the then turn the second pass to the .0081 for a predetermined distance in order to create a step for slip neck seating. What neck bushing if any are...

Off The Lands Gene, thanks for your comments. I have already tried tuning with the bullet further back in the case(off the lands) during some short mild weather conditions that we had in Mi. and the results looked very good. Of course I had to move the tuner in order to get the rifle to shoot...

Seating Bullet Off Lands? In 2016 and 2017, I used the Wollum's tuner and seated the bullet on the jam for both years. The rig finished 2nd and 5th respectively in the NBRSA Eastern division. I did have trouble keeping the rifle in tune for 2-4 days during a tournament. However, this year I am...

Tuner for 1.35 inch barrel Pablo, get a hold of Dale Wollum's and he will make a tuner to fit your barrel. Dale made a tuner for my rail gun last year. tunermi

Congrats to two gun ted heindselman Congrats to two gun Ted Heindselman for the Shelby County Deer Hunters NBRSA match. Ted also won the NBRSA shooter of the year. Great effort from new shooter Ron Bush.

Vic Potts-Great Shooting Vic, very good shooting and great aggs. Mel

Good Recovery George, God bless, have a good recovery and will see you at the SS. Mel Newransky

Email Address Melissa, appreciate it if you could include your email and a camp ground reservation map. Mel

Go Ted Ted has been shooting very good the past few years. Of course, he has continued to shoot very well this year. It is going to be very tough to catch him this year. Mel

RESULTS OF SHELBY COUNTY BRIAR HAIL MEMORIAL-6/24,6/25 The weather cleared on Sat and Sun but with switchy and difficult winds. A summary of results is as follows: Two Gun 1. Ted Heindselman-.2315 2. Tim Humphrey-.2721 3. Carl Thompson-.2809 4. DeWayne Wood-.2883 5. Mel Newransky-.3427 LV100 1...

Results of lowell hottenstein memorial at wwcca -6/10-6/11,2017 Results of Lowell Hottenstein Memorial at WWCCA for June 10-11,2017 The weather on Sat started out hot and windy and Sun the temp increased to 95 with mirage and wind. Congrats to Ted Heindselman for the two gun. A summary of...

ADDITIONAL RESULTS OF HOLTON PRESIDENT'S CUP Apr 29-30 Holton President's Cup results for 4/29-30 started out cold and windy on Sat and rain with the cold on Sun. It turned out to be an endurance match due to the weather. A summary of results is as follows: LV 100 1. Vic Halverson-.2044 2. Bob...

Dale Wollum's Tuner The Dale Wollum's Tuner from PMA Tool was a very good tool for shooting small groups during 2016. The tuner was adjusted for temperature/humidity. Of course sighter groups still had to be shot to confirm the tuner settings. Powder charges had to be moved during high...